Reference: QO100-ANT-POTY-SMA-762
The POTY (Patch Of The Year) antenna is a dual-band 2.4 GHz /10 GHz antenna, with left-hand circular polarization LHCP for 2400 MHz transmission and a linear horn antenna for 10500 MHz reception with
Reference: SIRIO-SCO2451-2794
2.4 GHz & 5.8 GHz collinear base antenna. Fibreglass, with female N connector.
Reference: WA5-ANT-PLAN700-782
Omni-directional planar antenna, works from 700 Mhz to 26 GHz with a gain of 2-5 dBi.The coaxial cable to power this ultra wideband Planar antenna is soldered directly to the PCB.Frequencies: 700 Mhz
23,25 €
Reference: ANT-GSM-29CM-278
High-efficiency antenna with 5dbi gain, SMA male connector for GSM and multiband devices 3G, 4G, UMTS, WIFI, EDGE and GPRS. Frequencies : 690-960Mhz and 1710-2620MHzConnector: SMA maleLength: 29
11,58 €
Reference: WA5-ANT-PLAN26-781
Omni-directional plane antenna, works from 2 Ghz to 26 GHz with a gain of 2-5 dBi.The coaxial cable to power this very broadband Vivaldi antenna is soldered directly to the PCB.Frequencies: 2 - 26
16,58 €
Reference: ANT-GSM-16CM-279
High-efficiency antenna with 3dbi gain, male SMA connector for GSM and multiband devices 3G, 4G, WIFI, UMTS, EDGE and GPRS. Frequencies : 698-960Mhz, 1710-2170Mhz and 2500-2700MhzConnector: SMA
Reference: WA5-ANT-PATCH4-5800-783
Printed circuit antenna WA5VJB Quad Patch for 5.8Ghz with a gain of 12dBi. The antenna is delivered without connector (solder wire on the PCB).Frequencies: 5800 MHzType: PatchNumber of elements:
15,42 €
Reference: WA5-ANT-PATCH2-5800-784
Printed circuit antenna WA5VJB Dual Patch for 5.8Ghz with a gain of 9dBi max. The antenna is delivered without connector (solder wire on the PCB).Frequencies: 5800 MHzType: PatchNumber of elements:
10,75 €
Reference: WA5-ANT-BW2425-787
Big Wheel WA5 PCB antenna for 2425MHz with a gain of 2dBi. The antenna is delivered without connector (coaxial cable or SMA to weld on the PCB).Frequencies: 2425 MHzType: Big WheelGain: 2dBiImpedance:
10,75 €
Reference: COAX-RG402-RP-SMA-M-SMA-M-993
This 10cm long, very low-loss RG402 coaxial cable converts an RP-SMA Male connector to an SMA Male connector. Please note that this adapter is a Reverse SMA, mainly used for WIFI applications. Note:
Reference: COAX-RG402-RP-SMAM-SMAF-10CM-994
This very low-loss rigid RG402 coaxial connector, 10cm, 15cm or 20cm long, can be used to convert an RP-SMA Male connector to an SMA Female connector. WarningThis adapter is a Reverse SMA (RP-SMA),
Reference: PIGTAIL-RP-SMA-M-RP-SMA-F-2290
50 cm RG316 low-loss pigtail cable, with RP-SMA Male connector to RP-SMA Female connector. End 1 connector: RP-SMA maleEnd 2 connector: RP-SMA female Impedance: 50 OhmsCoaxial cable: RG316 low
Reference: ADAPT-RP-SMA-F-SMA-F-263
This RF adapter converts a femaleRP-SMA connector to a female SMA connector. Please note that this adapter is a Reverse SMA, mainly used for WIFI applications.
Reference: ADAPT-RP-SMA-M-N-F-1543
This RF adapter converts an RP-SMA Male connector to an N Female connector.Terminal 1 connector: RP-SMA male Connector end 2: N female Impedance: 50 Ohms Nickel plated Frequency: 0 to 6 GHzPlease
4,08 €
Reference: ADAPT-RP-SMA-M-N-M-1544
This RF adapter converts an RP-SMA Male connector to an N Male connector. Note that this adapter is a Reverse SMA, mainly used for WIFI hotspots, for example.End 1 connector: RP-SMA male End 2
4,08 €
Reference: ADAPT-RP-SMA-F-SMA-M-289
This RF adapter converts a femaleRP-SMA connector to a male SMA connector. Please note that this adapter is a Reverse SMA, mainly used for WIFI applications.
Reference: ANT-HELTEC-2400-WIFI-885
PCB WIFI 2400 Mhz (2.4 Ghz) antenna with 4dBi gain. The antenna is supplied with a 15cm long soldered wire and an IPEX UFL connector. Frequencies: 2400-2490 MHz Bands: WIFI 802.11n/b/gGain:
Reference: NAGOYA-NW-2458-02-1065
11cm WIFI antenna with a gain of 2dbi for the 2.4 Ghz and 5 Ghz wifi bands, with RP-SMA male reverse connector for dual-band wifi device and router (2G and 5G).Comes with: 1 original Nagoya NW-2458 2G
Reference: ADAPT-RP-SMA-M-SMA-M-262
This RF adapter converts an RP-SMA Male connector to an SMA Male connector. Please note that this adapter is a Reverse SMA, mainly used in WIFI connectivity.
Reference: ADAPT-RP-SMA-M-SMA-F-290
This RF adapter converts an RP-SMA Male connector to an SMA Female connector. Please note that this adapter is a Reverse SMA, mainly used for WIFI equipment. Also compatible with hotspot equipment for
Reference: PIGTAIL-RP-SMA-M-SMA-F-995
This RG316 low-loss pigtail cable converts an RP-SMA Male connector to an SMA Female connector. Please note that this adapter is a Reverse SMA, mainly used for WIFI applications.
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.