Viewed products
The mAT-705Plus automatic antenna tuner is...
The mAT-705Plus automatic antenna tuner is designed for the Icom IC-705 transceiver and can operate in the range of 1.8MHz to 54MHz.
It is powered by two built-in lithium batteries, and can be charged by a USB power adapter.
It can tune dipoles, verticals, Yagis, or virtually any coaxial fed antenna. It fits a wide range of antennas and impedances.
Includes: 1 mAT-705 tuner and 1 control cable
The mAT-705Plus automatic antenna tuner responds to the control commands of the IC-705 transceiver, providing microprocessor-based impedance matching on the amateur bands from 160 to 6 metres. On the HF and 50 MHz bands, the impedance matching range is from 5Ω to 1500Ω. The tuner comes with a control cable.
The mAT-705Plus has 16,000 frequency memories. When tuning to or near a previously tuned frequency, the mAT-705Plus uses the "Memory Tune" function to recall the previous tuning parameters in a fraction of a second.
If no stored parameters are available, the tuner performs a full tuning cycle, storing the parameters for recall into memory on subsequent tuning cycles to that frequency. In this way, the mAT-705Plus "learns" as it is used, adapting to bands and frequencies as it goes.
The new version of the tuner eliminates the mechanical power switch. Its power supply is automatically controlled by the transmitter. After plugging in the control cable, it turns on and off with the transmitter, without the need for manual switching on and off.
Reference: CORDON-RG58-BNC-30CM-1115
Coaxial patch cable with BNC Male connector - BNC Male with RG58 MIL-C-17 50 ohm coaxial cable for use in frequencies from 0 to 1000Mhz. Available in different lengths: 30cm, 50cm, 1m or 2 metres
Reference: ICOM-IC705-1109
Icom IC-705 SDR QRP mobile transceiver station for HF, 50, 144 and 430MHz amateur radio band, with 5W on battery and 10W on external power supply (13.8V), reception from 30Khz to 200Mhz and from 400
Reference: WIND-IC-705-VEHICLE-CABLE-2393
1.5m in length, for vehicle power cigar-lighter socket to supply of ICOM IC-705.
Reference: CABLE-RG58-BNC-UHF-50CM-1117
Coaxial patch cable with BNC Male - UHF Male connector (PL-259) with RG58 MIL-C-17 50 ohm coaxial cable for use in frequencies from 0 to 1000Mhz. Available in different lengths: 50cm, 1m or 2 metres.
Reference: XIEGU-XPA125B-545
The Xiegu XPA125-B (new version) is a 100-125W amplifier for frequencies from 0.5 to 30Mhz and 50 to 54Mhz, with an integrated antenna tuner (1.8 to 30Mhz). It is equipped with protections:
Reference: XIEGU-G90-HAM-1013
The Xiegu G90 is a 20W portable HF amateur radio transceiver with a 24-bit SDR architecture, a built-in automatic antenna tuner, detachable display, 3cm (1.8 inch) high-brightness color TFT LCD
Reference: ICOM-OPC2421-1769
ICOM power cord, 150cm long, with a fuse (125V/4A) in each line, for IC-705. Supplied with: 1 OPC-2421 ICOM power cord.
Reference: WIND-IC-705-DC-CABLE-2391
Windcamp Cable specially designed for ICOM IC-705 radios, with a length of 1 meter, this cable ensures a reliable, solid connection between your radio and other compatible devices.
Click here to leave a review
Fonctionne bien sur les bandes basses ROS de 1.1 et a partir du 20 m.ne descend pas au dessous de 1.5.
Bonjour
Bien reçu et pas encore testé
bonnes fins d'ANNEE
Be the first to ask a question about this product!
The Xiegu XPA125-B (new version) is a 100-125W amplifier for frequencies from 0.5 to 30Mhz and 50 to 54Mhz, with an integrated antenna tuner (1.8 to 30Mhz). It is equipped with protections:
579,17 €tax excl.
The new Yaesu FT-818 ND is the replacement of the famous QRP FT-817 ND from Yaesu. Compared to the FT-817, the FT-818 is equipped with a TCXO-9 and offers 6W on 13.8V and 2.5W power supply on built-in
632,50 €tax excl.
The Xiegu G90 is a 20W portable HF amateur radio transceiver with a 24-bit SDR architecture, a built-in automatic antenna tuner, detachable display, 3cm (1.8 inch) high-brightness color TFT LCD
437,50 €tax excl.
The Xiegu CE-19 extension port makes it easy to connect a PC or other terminals and modems to use the digital modes SSTV, RTTY, ROS, PSK31, FT8, FT4, etc.The card allows you to extend the MINI-DIN8
24,17 €tax excl.
Icom IC-705 SDR QRP mobile transceiver station for HF, 50, 144 and 430MHz amateur radio band, with 5W on battery and 10W on external power supply (13.8V), reception from 30Khz to 200Mhz and from 400
1 290,83 €tax excl.
HF amateur radio base ICOM IC-7300 for HF bands from 1.8 to 30MHz, 6m from 50-52MHz, with 100 watts, integrated automatic antenna coupler, 4.3 "color LCD touch screen, keyboard, all analogue modes
1 070,83 €tax excl.
Coaxial patch cable with BNC Male connector - BNC Male with RG58 MIL-C-17 50 ohm coaxial cable for use in frequencies from 0 to 1000Mhz. Available in different lengths: 30cm, 50cm, 1m or 2 metres
6,58 €tax excl.
The Signalink SLUSB-6PM V2 interface pack is compatible with virtually all ICOM, Kenwood and Yaesu radios equipped with a 6-pin mini-DIN data port (DATA socket) such as: IC-706MKIIG, IC-9100, IC
157,50 €tax excl.
The mAT-10 is a compact tuner for use with the YAESU FT-817 and FT-818 transceivers and can also be used with other QRP transceivers. It can tune dipoles, verticals, Yagis, or virtually any coax-fed
212,50 €tax excl.
The mAT-40 is an automatic HF/SSB tuner that allows quick tuning of any unbalanced or single wire antenna automatically. Depending on the interface cable added, it can work with Yaesu (mAT-40-Y), ICOM
240,83 €tax excl.
The mAT-125E is a universal automatic antenna tuner that can be used in most HF transceivers. It has a working frequency range of 1.6-54 MHz and a maximum allowed RF power of 120 watts. It has
170,83 €tax excl.
Original ICOM BP-307 high capacity 3150mAh, IP67 7.2V Li-ion battery for ICOM IC-705 and ID-52E walkie talkie. To charge this battery in a vehicle, use CP-25H or BC-202IP3L. Can also be charged with
118,58 €tax excl.
ICOM power cord, 150cm long, with a fuse (125V/4A) in each line, for IC-705. Supplied with: 1 OPC-2421 ICOM power cord.
26,95 €tax excl.
Reinforced desktop microphone mounting bracket with 1/4 adapter screw for wired or wireless microphoneSpecification:- Maximum opening of bracket: 55mm- Thickness of bracket stable and tight: 22mm ~
5,80 €tax excl.
RC-1 Quick Release Antenna Bracket Kit For ICOM IC-705 Portable QRP radio transceiver.RC-1 quick release antenna mounting bracket for IC-705 Can be connected to a ground wire and ground network
36,57 €tax excl.
ARK-705 Shield is a three-dimensional protective shield designed for ICOM IC-705 portable transceiver. It is made of aluminum alloy by CNC machine tool, which can completely wrap the radio body,
129,17 €tax excl.
The RC-2 is a compact antenna support designed for ICOM IC-705 QRP portable transceiver. It is made of aluminum alloy by CNC machine tools, and can be easily connected to small GP antennas (such as
27,42 €tax excl.
Windcamp Cable specially designed for ICOM IC-705 radios, with a length of 1 meter, this cable ensures a reliable, solid connection between your radio and other compatible devices.
5,75 €tax excl.
1.0m in length, for ICOM IC-705 and Power Anderson compatible cable.
8,25 €tax excl.
1.5m in length, for vehicle power cigar-lighter socket to supply of ICOM IC-705.
8,25 €tax excl.
ICOM AH-730 automatic tuner for HF bands from 1.8 to 54MHz (160m to 6m), 150W (PEP) and 100W (continuous), for ICOM transceivers IC-7300IC-707, IC-718, IC-7200, IC-725, IC-7400, IC-7410, IC-7610,
415,00 €tax excl.
The Signalink SLCAB705 radio interface cable can be used with the Signalink USB sound card and the ICOM IC-705. This radio cable has a right-angle microphone plug and an RJ45 socket. The jumper module
29,08 €tax excl.
This jumper module is compatible with the QRP ICOM IC-705 mobile and the radio cable with reference: SLCAB705. Supplied with: 1 Signalink SLMODHT jumper module.
10,75 €tax excl.
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.