No products
New products
-
2.4GHz TX 2.5W Max Bidirectional Amplifier + 10dB RX Preamp
259,00 € tax excl. -
-
Switching power supply MOONRAKER SM-30II 30A
99,00 € tax excl. -
USB CAT & PTT Control Interface Digirig DR-891 for YAESU FT-891
99,00 € tax excl.
Viewed products
-
Automatic HF/SSB tuner...
The mAT-40 is an automatic HF/SSB tuner that...
-
JPC-12 GP 7-50Mhz 100W HF portable antenna JNCRadio / Chelegance
157,50 € 165,00 €
Automatic HF/SSB tuner mAT-40 MAT-TUNER for YAESU ICOM and KENWOOD
Read the reviewThe mAT-40 is an automatic HF/SSB tuner that allows quick tuning of any unbalanced or single wire antenna automatically.
Depending on the interface cable added, it can work with Yaesu (mAT-40-Y), ICOM (mAT-40-M) and KENWOOD (mAT-40-K) transceivers.
Supplied with: 1 mAT-40 tuner and 10m control cable
Download
Data sheet
- Frequency range: 1.6 to 54.0 MHz. Integrated frequency sensor
- Maximum power: 0.1 to 120 watts of peak SSB and CW power, 30 watts in PSK and digital modes, and 100 watts on 6 meters
- Tuning time: 0.1 to 5 seconds of full tuning, 0.1 seconds of memory tuning
- Minimum tunable antenna length: 2.5 m
The mAT-40 also has an advanced memory setting, providing 16,000 memory locations. When you tune near a previously used frequency, it will recall the settings for almost instantaneous tuning. It learns your favourite frequencies and bands as you use it. You can also start a tuning cycle manually if necessary.
It can operate in all kinds of harsh outdoor environments and is only 20cm in size, making it the smallest outdoor antenna tuner.
Customers also bought
22,90 €Reference: MTUNER-MAT40-Y-1607
Interface cable mAT-40-Y MAT-TUNER for YAESU transceivers
mAT-40-Y interface cable that connects the mAT-40 automatic tuner to a YAESU transceiver.
22,90 €
22,90 €Reference: MTUNER-MAT40-M-1606
Interface cable mAT-40-M MAT-TUNER for ICOM transceivers
mAT-40-M interface cable that connects the mAT-40 automatic tuner to an ICOM transceiver.
22,90 €
7,90 €Reference: MESSI-CO-UHF-7M-S-EVO-1141
UHF Male PL259 connector for 7mm cable ULTRAFLEX 7
UHF Male connector (PL-259) to soldering, Messi & Paoloni for 7mm coaxial cable M&P ULTRAFLEX 7.New design with double seal to ensure perfect protection against water infiltration, control and
7,90 €
22,90 €Reference: MTUNER-MAT40-K-1608
Interface cable mAT-40-K MAT-TUNER for KENWOOD transceivers
mAT-40-K interface cable that connects the mAT-40 automatic tuner to a KENWOOD transceiver.
22,90 €
We also recommend
285,00 €Reference: YAESU-FC40-478
Yaesu FC-40 Automatic Antenna Tuner 1.8-54Mhz for FT-450 FT-857D FT-891 FT-991A FT-710
Automatic antenna tuner Yaesu FC-40 for transceivers of series : FT-450, FT-857, FT-897, FT-857D, FT-891, FT-991A, FTDX-3000, FTDX-101D, FTDX-10 et FT-710.The FC-40 automatic tuner is designed to be
285,00 €
279,00 €Reference: YAESU-FC50-479
Yaesu FC-50 Automatic Antenna Tuner for FT-891
This Yaesu FC-50 automatic antenna tuner is specially designed for the FT-891 and for indoors, deskop or mobile used.The FC-50 automatic tuner antenna operates from 1.8-29Mhz and 50-54 MHz with a
279,00 €
209,00 €Reference: MTUNER-MAT-30-1599
Automatic tuner mAT-30 V2 MAT-TUNER for YAESU transceivers
The mAT-30 V2 is an automatic tuner for use with YAESU transceivers. It works with all YAESU transceivers that support a YAESU FC-30, FC-40 or FC-50 tuner. Frequency range: 1.6MHz to 54MHz Maximum
209,00 €
255,00 €Reference: MTUNER-MAT-10-1600
mAT-10 MAT-TUNER for YAESU FT-817 and FT818 transceivers
The mAT-10 is a compact tuner for use with the YAESU FT-817 and FT-818 transceivers and can also be used with other QRP transceivers. It can tune dipoles, verticals, Yagis, or virtually any coax-fed
255,00 €
Reviews
Additional or similar equipment
-
Yaesu FC-40 Automatic Antenna Tuner 1.8-54Mhz for FT-450 FT-857D FT-891 FT-991A
Automatic antenna tuner Yaesu FC-40 for transceivers of series : FT-450, FT-857, FT-897, FT-857D, FT-891, FT-991A, FTDX-3000, FTDX-101D, FTDX-10 et FT-710.The FC-40 automatic tuner is designed to be
285,00 € tax incl.In stock237,50 €tax excl.
-
Yaesu FC-50 Automatic Antenna Tuner for FT-891
This Yaesu FC-50 automatic antenna tuner is specially designed for the FT-891 and for indoors, deskop or mobile used.The FC-50 automatic tuner antenna operates from 1.8-29Mhz and 50-54 MHz with a
279,00 € tax incl.In stock232,50 €tax excl.
-
Automatic tuner mAT-30 V2 MAT-TUNER for YAESU transceivers
The mAT-30 V2 is an automatic tuner for use with YAESU transceivers. It works with all YAESU transceivers that support a YAESU FC-30, FC-40 or FC-50 tuner. Frequency range: 1.6MHz to 54MHz Maximum
209,00 € tax incl.In stock174,17 €tax excl.
-
mAT-10 MAT-TUNER for YAESU FT-817 and FT818 transceivers
The mAT-10 is a compact tuner for use with the YAESU FT-817 and FT-818 transceivers and can also be used with other QRP transceivers. It can tune dipoles, verticals, Yagis, or virtually any coax-fed
255,00 € tax incl.In stock212,50 €tax excl.
-
Interface cable mAT-40-M MAT-TUNER for ICOM transceivers
mAT-40-M interface cable that connects the mAT-40 automatic tuner to an ICOM transceiver.
22,90 € tax incl.Out of stock, available within 7-10 days19,08 €tax excl.
-
Interface cable mAT-40-Y MAT-TUNER for YAESU transceivers
mAT-40-Y interface cable that connects the mAT-40 automatic tuner to a YAESU transceiver.
22,90 € tax incl.In stock19,08 €tax excl.
-
Interface cable mAT-40-K MAT-TUNER for KENWOOD transceivers
mAT-40-K interface cable that connects the mAT-40 automatic tuner to a KENWOOD transceiver.
22,90 € tax incl.In stock19,08 €tax excl.
Universal automatic antenna tuner mAT-125E MAT-TUNER
The mAT-125E is a universal automatic antenna tuner that can be used in most HF transceivers. It has a working frequency range of 1.6-54 MHz and a maximum allowed RF power of 120 watts. It has
205,00 € tax incl.In stock170,83 €tax excl.
Automatic HF tuner mAT-180H MAT-TUNER for ICOM and KENWOOD transceivers
The mAT-180H is an automatic antenna tuner operating in the 1.8MHz to 54MHz range, at power levels up to 120 watts. It allows tuning of dipoles, verticals, Yagis, or virtually any coax-fed antenna. It
189,00 € tax incl.In stock157,50 €tax excl.
HF mAT-K100 MAT-TUNER for KENWOOD and ICOM
The mAT-K100 is an automatic antenna tuner operating in the 1.8MHz to 54MHz range, at power levels up to 120 watts. It allows tuning of dipoles, verticals, Yagis, or virtually any coax-fed antenna. It
209,00 € tax incl.In stock174,17 €tax excl.
Automatic antenna tuner mAT-705 Plus V2 MAT-TUNER for ICOM IC-705 QRP
The mAT-705Plus automatic antenna tuner is designed for the Icom IC-705 transceiver and can operate in the range of 1.8MHz to 54MHz. It is powered by two built-in lithium batteries, and can be charged
259,00 € tax incl.In stock215,83 €tax excl.
Yaesu FT-710 HF SDR 160m to 6m 100W integrated tuner CAT HP external
The Yaesu FT-710 AESS HF transceiver is the latest addition to the Yaesu SDR range, it covers all HF amateur radio bands from 160m to 6m with a power of 100W max.Features a large 4.3 inch color touch
1 195,00 € tax incl.In stock995,83 €tax excl.
1 249,00 €
ICOM AH-730 Automatic tuner 1.8 to 54MHz waterproof IPX4 150W PEP
ICOM AH-730 automatic tuner for HF bands from 1.8 to 54MHz (160m to 6m), 150W (PEP) and 100W (continuous), for ICOM transceivers IC-7300IC-707, IC-718, IC-7200, IC-725, IC-7400, IC-7410, IC-7610,
498,00 € tax incl.In stock415,00 €tax excl.
Yaesu FT-710 FIELD HF SDR transceiver 160m to 6m 100W integrated CAT tuner
The Yaesu FT-710 FIELD is the version without external loudspeaker and with a shoulder strap, of the new HF transceiver of the Yaesu SDR range, it covers all HF amateur radio bands from 160m to 6m
1 129,00 € tax incl.In stock940,83 €tax excl.
1 149,00 €
Delivery Europe & Overseas
Stock and shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal
Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.