No products
New products
-
2.4GHz TX 2.5W Max Bidirectional Amplifier + 10dB RX Preamp
259,00 € tax excl. -
-
Switching power supply MOONRAKER SM-30II 30A
99,00 € tax excl. -
USB CAT & PTT Control Interface Digirig DR-891 for YAESU FT-891
99,00 € tax excl.
Viewed products
-
Black aero cleat...
Black aero cleat tensioner with blocker for 3...
-
AlexTune RF tuning indicator for QRP 20W magnetic loop antenna
36,67 € -20% 45,83 €
Black aero cleat tensioner with blocker for 3 to 4 mm rope
Read the reviewBlack aero cleat tensioner with blocker for 3 to 4 mm diameter rope UV stabilised nylon.
The Clamcleat® CL828-70 cleat is made of Micros Aero alloy and has a rigging spout with a 4:1 ratio.
The position of the cleat on the rope can be adjusted by hand. No tools are required, ideal for light loads.
Use for antenna masts, wire antenna systems, sports nets, canvas structures and lashings.
- Dimensions: 60 x 13 x 29 mm
- Strength: 280 daN, ~kg
- Working load [daN, ~kg] 84
Download
Guide in French to choose your Mastrant guying antenna system and accessories. 994.98k
Guide in English to choose your Mastrant guying antenna system and accessories. 1.02M
Data sheet
The service life depends on how the cleats are used. When used for light loads on control lines, cleats can last 10 years.
However, stretching a rope by pulling it back through the teeth will burn out a nylon cleat more quickly. This is why alloy cleats were originally developed.
Alloy cleats can withstand this type of use, provided the rope is clean. A dirty, sandy rope will wear out any binding.
Hard anodised cleats have a slightly higher wear resistance than silver cleats. Nylon cleats are completely resistant to corrosion in salt water. They are also resistant to many acids and chemicals. Alloy cleats have excellent corrosion resistance. Anodised cleats have slightly better corrosion resistance than silver cleats.
To help you choose the correct guy ropes and the necessary and compatible accessories, see the installation diagrams and tables in the Mastrant guide, available in the"Download" section.
Customers also bought
0,35 €Reference: MASTRANT-COSSE-ATH03-1885
Core nut for steel rope and guy rope from 3 to 10 mm
The core lug protects the guy at the end against premature wear, fraying and is indispensable for guying. Made of A4 stainless steel (AISI 316) to prevent rusting. Also suitable for steel guy wire.
0,35 €
1,70 €Reference: MASTRANT-CLIP-ADC03-1911
Duplex steel cable clip 3 to 10 mm for guy wires
Cable clamp (duplex clip) prevents spontaneous loosening, strong counter-pressure due to the elasticity of the ropes. The 2 nuts allow for easy loosening for adjustments. To be used with a heart lug
1,70 €
5,90 €Reference: PIGTAIL-SMA-M-UHF-F-80
Pigtail SMA Male UHF Female 15/50/100cm RG316
Adapter cable pigtail SMA Male to plug UHF Female. RG 316 50 ohm coaxial cable. Available in 3 lengths: 15, 50 and 100 cm.
5,90 €
1,70 €Reference: MASTRANT-GRIP-ASC03-1912
Stainless steel cable clamp for 3 to 10 mm guy wires
Stainless steel cable clamp for guy wires, easy to install thanks to the long threaded section. For optimal hold, we recommend using 3 cable ties and a heart-shaped lug per fixing point.
1,70 €
We also recommend
- 0,35 €
Reference: MASTRANT-COSSE-ATH03-1885
Core nut for steel rope and guy rope from 3 to 10 mm
The core lug protects the guy at the end against premature wear, fraying and is indispensable for guying. Made of A4 stainless steel (AISI 316) to prevent rusting. Also suitable for steel guy wire.
0,35 € - 1,70 €
Reference: MASTRANT-CLIP-ADC03-1911
Duplex steel cable clip 3 to 10 mm for guy wires
Cable clamp (duplex clip) prevents spontaneous loosening, strong counter-pressure due to the elasticity of the ropes. The 2 nuts allow for easy loosening for adjustments. To be used with a heart lug
1,70 € 
3,87 €Reference: MASTRANT-TEE-ASHE06-1918
Tensioner for guy wires with double eyelet diameter 10 to 16 mm
Tensioner for guy ropes with double eyelet (diameter 10 to 16 mm) in stainless steel for easy installation. For the calculation of the maximum static load, we recommend 30% of the breaking load (BS).
3,87 €
3,87 €Reference: MASTRANT-TEH-ASHH06-1919
Tensioner for guy rope with hook and eyelet diameter 10 to 16 mm
Tensioner for guy wires with hook and eye (diameter from 10 to 16 mm) in stainless steel for easy assembly.Strength: 1100 daN, ~kg Working load 80 daN, ~kg
3,87 €
Reviews
Additional or similar equipment
-
Core nut for steel rope and guy rope from 3 to 10 mm
The core lug protects the guy at the end against premature wear, fraying and is indispensable for guying. Made of A4 stainless steel (AISI 316) to prevent rusting. Also suitable for steel guy wire.
0,35 € tax incl.In stock0,29 €tax excl.
-
Duplex steel cable clip 3 to 10 mm for guy wires
Cable clamp (duplex clip) prevents spontaneous loosening, strong counter-pressure due to the elasticity of the ropes. The 2 nuts allow for easy loosening for adjustments. To be used with a heart lug
1,70 € tax incl.In stock1,42 €tax excl.
-
Tensioner for guy wires with double eyelet diameter 10 to 16 mm
Tensioner for guy ropes with double eyelet (diameter 10 to 16 mm) in stainless steel for easy installation. For the calculation of the maximum static load, we recommend 30% of the breaking load (BS).
3,87 € tax incl.In stock3,23 €tax excl.
-
Tensioner for guy rope with hook and eyelet diameter 10 to 16 mm
Tensioner for guy wires with hook and eye (diameter from 10 to 16 mm) in stainless steel for easy assembly.Strength: 1100 daN, ~kg Working load 80 daN, ~kg
3,87 € tax incl.In stock3,23 €tax excl.
Single black rope tensioner for ropes from 1 to 8 mm
Clamcleat® Line-Lok® rope clamps offer superior performance compared to traditional guy wires. Designed to prevent rope slippage while being easily released, they are ideal for antenna masts, wire
0,42 € tax incl.In stock0,35 €tax excl.
Loop tensioner black cleat for 3 to 6 mm rope
Clamcleat loop tensioner for rope diameters from 3 mm (1/8") to 6 mm (1/4"). Black colour. UV stabilised nylon.Attached to a rope, the CL223 is quick to tension, easy to adjust and easy to release.
3,27 € tax incl.In stock2,73 €tax excl.
Plastic and stainless steel pulley for guy rope up to 3 mm
Plastic and stainless steel pulley Ø 16 mm, for rope diameters up to 3 mm, suitable for wire antennas.Highly stressed sliding bearing with cheek pieces made of high-quality, UV-resistant materials.
4,96 € tax incl.In stock4,13 €tax excl.
Stainless steel pulley for guy rope up to 5 mm
Single pulley 28.5 cm high and Ø 16mm, made of stainless steel (cheek piece and cage) and UV-resistant plastic, for guy rope up to 5 mm. Highly stressed sliding bearing, compact design and various
8,63 € tax incl.In stock7,19 €tax excl.
Stainless steel clevis turnbuckle for 10 or 12 mm diameter guy rope
Stainless steel turnbuckle for guy ropes, diameter 10 or 12 mm (to be selected below). The working load (SWL) for turnbuckles is the maximum load during a length change. For the calculation of the
17,16 € tax incl.In stock14,30 €tax excl.
Delivery Europe & Overseas
Stock and shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal
Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.