Selection of RF connectors, adapters, cables and accessories.
China
Reference: PIGTAIL-MCX-M-SMA-M-52
MCX Male to SMA Male pigtail adapter. Perfect for connecting the DTT dongle RTL3832 to the Ham it Up Ham it Up converter.
Reference: CABLE-RG402-SMA-COUDE1-990
Very low-loss RG-402 coaxial cable with a straight male SMA connector on one end and an angled SMA connector on the other. For connecting, for example, a 2400 MHz amplifier to an OQ-100 converter, or
Reference: ADAPT-MUHF-M-BNC-F-843
RF adapter with mini-UHF Male to BNC Female connector. Impedance 50 ohms.
Reference: ADAPT-UHF-F-UHF-F-294
RF adapter for UHF Female to UHF Female connector (PL-259). Impedance 50 ohms.
Reference: ADAPT-BNC-M-BNC-F-426
BNC Male to BNC Female right-angle adapter.
Reference: ADAPT-BNC-M-N-F-2014
BNC Male to N Female adapter. Impedance 50 ohms, gold-plated.
Reference: ADAPT-BNC-F-UHF-M-2015
BNC Female to UHF Female adapter (SO239).
Reference: PIGTAIL-JACK-UHF-F-1071
Pigtail cable mono jack 3.5mm to UHF Female (SO-239). Coaxial cable RG316 50 ohms 15cm long.
Reference: ADAPT-TNC-M-N-F-1464
RF adapter for TNC Male to N Female connector. Connector 1 : TNC Male Connector 2: N Female Impedance 50 ohms
Reference: COAX-RG402-RP-SMA-M-SMA-M-993
This 10cm long, very low-loss RG402 coaxial cable converts an RP-SMA Male connector to an SMA Male connector. Please note that this adapter is a Reverse SMA, mainly used for WIFI applications. Note:
Reference: CABLE-COAX-RG402-SMA-M-10CM-989
Very low-loss coaxial cable with male SMA connector on each end, for connecting, for example, a 2.4 Ghz amp to an OQ-100 transverter, or any use requiring a very low-loss cable like the RG402. RG 402
Reference: ADAPT-N-M-SMA-M-1776
SMA Male to N Male adapter. Impedance 50 ohms, gold-plated.
Reference: ADAPT-BNC-M-UHF-F-73
BNC Male to UHF Female adapter. For VHF/UHF walkie-talkies and portables, scanners, with BNC Female connector for fitting an aerial.
Reference: PIGTAIL-SMA-M-UHF-F-80
Adapter cable pigtail SMA Male to plug UHF Female. RG 316 50 ohm coaxial cable. Available in 3 lengths: 15, 50 and 100 cm.
Reference: ADAPT-BNC-F-UHF-F2-390
BNC Female to UHF Female adapter (SO239).
Reference: ADAPT-SOCLE-N-F-448
Base and N female solder socket, with 4 fixing holes.
Reference: ADAPT-MUHF-M-SMA-F-842
RF adapter with mini-UHF Male to SMA Female connector. Impedance 50 ohms.
Reference: COAX-RG402-RP-SMAM-SMAF-10CM-994
This very low-loss rigid RG402 coaxial connector, 10cm, 15cm or 20cm long, can be used to convert an RP-SMA Male connector to an SMA Female connector. WarningThis adapter is a Reverse SMA (RP-SMA),
Reference: PIGTAIL-SMA-M-SMA-F-15CM-996
This low-loss pigtail cable in RG316 converts a SMA Male connector to an SMA Female connector. Available in 15cm, 50cm or 1 metre.
Reference: PIGTAIL-JACK-BNC-F-1074
Pigtail cable mono jack 3.5mm to BNC Female. Coaxial cable RG316 50 ohms 15cm long.
Reference: ADAPT-BNCM-BAJ-2174
BNC Male to Jack-U banana plug adapter - pole terminal
Reference: PIGTAIL-F-MALE-UHF-F-738
Adapter pigtail cable F Male to UHF Female. RG316 coaxial cable 50 ohms and 15cm. The F connector is particularly used for satellite equipment.
Reference: ADAPT-FME-M-UHF-M-1264
FME-Male / UHF-Male adapter (PL259).
Reference: RFKONNECT-RG58SO239-81T603-2212
0.3M UHF Male Connector to UHF Male Connector Adapter Cable RG58 Feeder Line RF Coaxial SL16 Extender CableIncluded in the package:- 1 x Adapter Cable
Reference: ADAPT-FZ-M-DIn-M-2848
Adapter Fakra Z Male straight to DIN Male Impedance 50 ΩFor car applications, DAB and DAB+ antenna, FM for car radio.
Reference: ADAPT-TNC-M-TNC-M-1467
RF adapter for TNC Male to TNC Male connector. Connector 1: TNC Male Connector 2: TNC Male Impedance 50 ohms
Reference: ADAPT-UHF-F-SMA-F-49
RF adapter, UHF female connector to SMA female connector, compatible with walkie-talkies, for example walkie-talkies Baofeng and Wouxun dual-band walkie-talkies. Professional quality with gold-plated
Reference: ADAPT-SMA-M-BNC-F2-275
RF adapter for walkie-talkies, VHF-UHF portables or scanners equipped with SMA and BNC antennas. - The adapter has a male SMA connector on one side and a female BNC connector on the other- The design
Reference: ADAPT-BNC-SMA-TALKIE-547
Adapter for walkie-talkies BNC Female <> SMA Female. Compatible with Baofeng, Wouxun and Anytone walkie-talkies.
Reference: ADAPT-BNC-M-BNC-M-2276
This 50 Ohm RF adapter has a BNC male connector on both sides.
Reference: CABLE-COAX-F-M-SMA-1M-875
F Male to SMA Male coaxial cable, with RG58 coaxial cable, 50 Ohms, available in 1, 2, 5 or 10m. The F connector is mainly used for TV and satellite equipment.
Reference: MINI-ANT-868-ANGLE-881
868 Mhz antenna with 2dbi gain, right-angle male SMA connector for hardware devices on the 868 Mhz ISM band and LoRa / LoRaWan applications or the Helium IoT network and in a test environment, over
Reference: PIGTAIL-RP-SMA-M-RP-SMA-F-2290
50 cm RG316 low-loss pigtail cable, with RP-SMA Male connector to RP-SMA Female connector. End 1 connector: RP-SMA maleEnd 2 connector: RP-SMA female Impedance: 50 OhmsCoaxial cable: RG316 low
Reference: ADAPT-N-F-SMA-F-1775
SMA female to N female adapter. Impedance 50 ohms, gold-plated.
Reference: ADAPT-RP-SMA-CHARGE3-579
This connector is an RP-SMA male terminated with a 50 Ohm dummy load for maximum power of 1 Watt at frequencies from 0 to 3Ghz. Terminal 1 : RP-SMA male (Reverse SMA)Terminal 2 : Dummy load 1W maximum
Reference: ADAPT-SMA-CHARGE1-576
This connector is an SMA male terminated with a 50 Ohm dummy load for maximum power of 1 Watt at frequencies from 0 to 3Ghz. Terminal 1 : SMA maleTerminal 2 : Dummy load 1W maximum continuous
Reference: ADAPT-SMA-F-TV-M-997
This adapter converts a female SMA connector to a male TV connector. Sold individually.
Reference: ADAPT-TNC-F-TNC-F-1469
RF adapter for TNC Female to TNC Female connector. Connector 1 : TNC Female Connector 2: TNC Female Impedance 50 ohms
Reference: ADAPT-TBNCM-2F-2275
T-type adapter, BNC Male to 2 BNC Female connector.
Reference: ADAPT-TNC-M-SMA-F-1460
RF adapter for TNC Male to SMA Female connector. Connector 1: TNC MaleConnector 2: SMA FemaleImpedance 50 ohms
Reference: ADAPT-TNC-M-SMA-M-1461
RF adapter for TNC Male to SMA Male connector. Connector 1: TNC MaleConnector 2: SMA MaleImpedance 50 ohms
Reference: ADAPT-TNC-M-BNC-F-1462
RF adapter for TNC Male to BNC Female connector. Connector 1: TNC MaleConnector 2: BNC FemaleImpedance 50 ohms
Reference: CABLE-USB-AB1-NOIR-66
Power and data cable, USB 2.0 Male A - Male B, 1m long. No ferrite.This cable is used to power the SDR HF Ham it up upconverter, for example, and is also compatible for powering and communicating with
Reference: ANT-BOUDIN-868-882
LoRa 868 Mhz ISM band coil antenna, 4cm long with 2dbi gain, SMA male connector. RX and TX frequencies: 868 MHzConnector: SMA maleGain: 2dBi SWR: ≤1.5Polarisation type: VerticalMaximum power:
Reference: ADAPT-SMA-M-UHF-F-67
SMA Male to UHF Female Adapter (SO-239).
Reference: ADAPT-SMA-M-BNC-F-85
SMA Male to BNC Female adapter. Compatible with Ham It Up HF converter card, HackRF and the SDR receiver FUNcube Dongle Pro+ receiver.
Reference: PIGTAIL-SMA-M-SMA-M-81
SMA Male to SMA Male pigtail adapter, for connecting a card, for example converter Ham it upconverter card to the SDR transceiver HackRF One SDR transceiver, or the SDRPlay broadband receiverwideband
Reference: ADAPT-RP-SMA-F-SMA-F-263
This RF adapter converts a femaleRP-SMA connector to a female SMA connector. Please note that this adapter is a Reverse SMA, mainly used for WIFI applications.
Reference: PIGTAIL-MCX-15MM-557
MCX Male to MCX Male adapter. The MCX connector is compatible with the DVB-T USB dongle USB Dongle and the QRP X5105 for use as a panadapter. RG 316 50 ohm coaxial cable. Available in 15cm, 50cm or 1
6,50 €
Reference: PIGTAIL-BNC-M-MCX-M-295
Pigtail MCX Male to BNC Male adapter. RG 316 50 ohm coaxial cable, approx. 15 cm long.
5,50 €
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.