Selection of RF connectors, adapters, cables and accessories.
China
Reference: RALL-COAX-RP-SMAM-NM-20M-1507_8
Coaxial cable type extension, low loss KSR-400, with RP-SMA Male to N Male connector for use from 0 to 6Ghz. The KSR400 coaxial is equivalent to the LMR-400 in terms of performance and losses.
129,70 €
Reference: ANT-GSM-29CM-278
High-efficiency antenna with 5dbi gain, SMA male connector for GSM and multiband devices 3G, 4G, UMTS, WIFI, EDGE and GPRS. Frequencies : 690-960Mhz and 1710-2620MHzConnector: SMA maleLength: 29
Reference: RALL-COAX-SMAM-NM-50CM-2406
KSR-400 low-loss coaxial cable extension with SMA Male to N Male connector for use from 0 to 6 GHz. The KSR400 coaxial cable is equivalent to the LMR-400 in terms of performance and losses.Available
Reference: RFKONNECT-CASQUE-81T628-2232
Basic version of the operator headset with noise-cancelling microphone and 3.5 interface for telephone operators- It is used in the insurance, banking, e-commerce and operations sectors.- Comfortable
Reference: ANT-GSM-17CM-CLIP-391
High-efficiency antenna with 5dbi gain, SMA male connector for GSM and multiband devices 3G, UMTSEDGE and GPRS. This 3G mobile broadband antenna is ideal for improving signal quality and transfer
Reference: RALL-COAX-400-NM-NM-50CM-1512
Very low-loss N Male - N Male coaxial extension cable with KSR400, equivalent to LMR400, for RF use from 0 to 6Ghz. The KSR-400 coaxial cable is equivalent to the LMR-400 in terms of performance and
Reference: RF-KONNECT-DONUTSW-87T296-2670
TheSW donut antenna covers a reception frequency range of 4 to 24 MHz, and is compatible with an SDR receiverMalachite or other receiver for indoor short-wave reception. High-impedance (Hi-Z)
Reference: CABLE-COAXIAL-SMA-M-UHF-1M-305
SMA Male to UHF Male coaxial cable with KSR195 low-loss 50 ohm coaxial cable for use from 0 to 6 GHz. Length: 1, 2, 5 or 10 metresConnector 1: SMA MaleConnector 2: UHF Male
Reference: PIGTAIL-MCX-M-RCA-M-684
Pigtail MCX Male to RCA Male adapter cable. RG316 coaxial cable (low loss) 50 ohms120cm long
Reference: CABLE-USB1-90CM-FERRITE-850
USB 2.0 printer cable Male A - Male B, with 2 ferrites to protect against interference and parasites. This cable is used to power and communicate with a printer or scanner, as well as SDR receiver
Reference: PIGTAIL-2FZ-M-DIN-M-2840
Adapter cable Double Fakra Z Male straight to DIN Male RG174 coaxial, 20cm long Impedance 50 ΩFor RF applications, e.g. in cars, car radio aerials, FM, DAB or DAB+.
Reference: RFKONNECT-OREILLE2-81T631-2234
Acoustic air earphones with noise-cancellation function and silicone ear plug for cell phones. They fit the round earphone jack of Android/Apple smartphones with 3.5mm jack plug. Soft
Reference: RFKONNECT-CORDON6B-81T602-2211
6-pin power cable compatible with ICOM and Kenwood and Yaesu sets equipped with a 6-pin connector.- Compatible with : ICOM, Kenwood and Yaesu - Operating voltage: 12 ~ 14V - Fuse: 30A - Support high
Reference: ANT-GSM-16CM-279
High-efficiency antenna with 3dbi gain, male SMA connector for GSM and multiband devices 3G, 4G, WIFI, UMTS, EDGE and GPRS. Frequencies : 698-960Mhz, 1710-2170Mhz and 2500-2700MhzConnector: SMA
Reference: PIGTAIL-MCX-M-N-M-455
MCX Male to N Male adapter. RG 316 50 ohm coaxial cable, 15 cm long.
Reference: ANT-GPS-81T402-886
Active GPS antenna (ceramic) with LNA, magnetic support, RG174 coaxial cable with male SMA connector. This active antenna can be used with any equipment fitted with an SMA connector and a 3.3V Bias-T
Reference: PIGTAIL-RP-SMA-F-N-F-452
RP-SMA (Reverse SMA) Female to N Female pigtail adapter. 50 ohms.
Reference: PIGTAIL-RP-SMA-F-N-M-451
Pigtail adapter RP-SMA (Reverse SMA) Female to N plug Male. RG 316 50 ohm coaxial cable, 15cm long.
Reference: PIGTAIL-MCX-M-RCA-M-683
Pigtail MCX Male to RCA Male adapter cable. RG174 coaxial cable 50 ohms120cm long
Reference: RF-KONNECT-DONUTAM-87T295-3006
TheAM loop-donut antenna covers a frequency range of 500 to 2000 kHz, and is compatible with an SDR receiver, Malachite, Malahit or other receiver for indoor reception. High-impedance (Hi-Z)
Reference: CABLE-COAXIAL-UHF-M-1M-876
UHF Male - UHF Male coaxial cable extension with KSR195 low-loss 50 ohm coaxial cable for use from 0 to 6 GHz. Available lengths: 50cm, 1, 2, 3, 5 or 10, 15 and 20 metresConnector 1: UHF Male
Reference: PIGTAIL-SMA-M-RCA-M-682
Adapter cable pigtail SMA Male to RCA Male. RG174 coaxial cable 50 ohms120cm long
Reference: ADAPT-SMA-CHARGE2-577
This connector is an SMA male terminated with a 50 Ohm dummy load for maximum power of 1 Watt at frequencies from 0 to 6 GHz. Terminal 1 : SMA maleTerminal 2 : Dummy load 1W maximum continuous
Reference: CABLE-COAXIAL-SMA-M-MCX-1M-306
SMA Male to MCX Male coaxial cable with KSR195 low-loss 50 ohm coaxial cable for use from 0 to 6 GHz. Length: 1 or 5 metresConnector 1: SMA MaleConnector 2: MCX Male
Reference: ADAPT-SMA-ATTENUA3-826
This adaptor is an SMA male attenuator available in -3, -6, -10, -15, -20 or -30dB versions for operating frequencies from 0 to 6 GHz. This attenuator is symmetrical and can be used in both
Reference: PIGTAIL-MCX-M-N-F-454
MCX Male to N Female adapter. RG 316 50 ohm coaxial cable, 15cm long.
Reference: CORDON-RG58-PL-SMA-30CM-2974
Coaxial cable with UHF Male - SMA Male connector (PL-259) with RG58 MIL-C-17 50 ohm coaxial cable for frequency use from 0 to 1000Mhz. Available in different lengths: 50cm, 1, 2, 5 or 10m. Connector
Reference: ADAPT-COUDE-N-M-UHF-F-436
Angled RF adaptor, N connector male to UHF female (SO239). Impedance 50 ohms.
Reference: RFKONNECT-PCB-DEMO-KIT2-1077
This NanoVNA RF demo kit is composed of a PCB to assemble, to perform tests or demonstration of RF integrated circuit (DIP) and SMT (SMT) components.Adapted to work with vector network analyzer
Reference: RFKONNECT-ANTENNA-ADSB-308
Passive omnidirectional PCB antenna for ADS-B reception on 1090 MHz, operates on RX from 1060 to 1120 MHz. The antenna is supplied with a female SMA connector soldered to the PCB. Optional: SMA
Reference: RF-KONNECT-87T298-SPF5189Z-833
This SPF5189Z LNA preamp improves reception performance from 50 Mhz to 4000 Mhz, based on SPF5189Z, with a noise factor of 0.6 dB and a maximum gain of approximately 20dB.This low noise amplifier is
Reference: ADAPT-COUDE-N-M-N-M-434
Angled RF adaptor, N male to N male connector. Impedance 50 ohms.
Reference: PIGTAIL-F-MALE-N-F-739
Adapter pigtail cable F Male to N Female. RG316 coaxial cable 50 ohms and 15cm. The F connector is particularly used for satellite equipment.
Reference: ADAPT-COUDE-N-M-N-F-435
Angled RF adaptor, N male to N female connector. Impedance 50 ohms.
Reference: PIGTAIL-SMA-M-N-F-79
SMA Male to N Female pigtail adapter. RG 316 50 ohm coaxial cable. Available in 15cm, 50cm or 1 metre lengths (choose below).
Reference: CABLE-COAXIAL-SMA-M-1M-302
SMA Male to SMA Male cable with KSR195 low-loss 50 ohm coaxial cable for use from 0 to 6Ghz. Available lengths: 0.5m (50cm), 1, 3 or 5 metresConnector 1: SMA MaleConnector 2: SMA Male
Reference: RFKONNECT-TROUSSE-81T658-2244
25 pieces screwdriver sets Omnipotent Repair Tool for Electronics Maintenance with Aluminum Handle and Carbon Steel HeadApplication:- Hamradio, homebrew, mobile phone. camera. fans. laptop. toys.
Reference: RFKONNECT-GAINE-81T405-2195
Packaged box DIY Heat Shrink Tube Insulation Sleeve for Electric Wire and Cable Flame Retardant Shrink TubeMethod of use:- Prepare the tools- Insert the wires to be connected into the heat-shrink
Reference: RFKONNECT-OREILLE1-81T629-2233
Acoustic tube walkie-talkie earphones with K-port, 3D stereo and intelligent noise reduction function- The white porcelain horn does not generate electric current or other noisy sounds, making the
Reference: PIGTAIL-BNC-M-N-F-2016
BNC Male to N Female pigtail adaptor. 15 cm RG 316 50 ohm coaxial cable.
Reference: ADAPT-N-M-N-M-600
RF adapter N male to N male connector. Impedance 50 ohms.
Reference: RFKONNECT-RG58-SMA-UHF-50CM-2213
RG58 coaxial cable, 50cm, SMA-Male to SO-239 (UHF female).Shielding: Single-layer pure copper shielding Frequency: 0 to 6000 MHz (6GHz) Diameter: 5mm Length: 50cm Impedance: 50ohm Temperature range:
Reference: PIGTAIL-BNC-M-BNC-M-2274
BNC Male to BNC Male pigtail cable with 120cm 50 ohm RG 316 coaxial cable.
Reference: ADAPT-N-M-UHF-F-252
RF adapter for N male to UHF female connector (SO239). Impedance 50 ohms.
Reference: PIGTAIL-BNC-F-UHF-M-2017
UHF Male to BNC Female pigtail adapter. 15 cm RG 316 50 ohm coaxial cable.
Reference: RALLONGE-COAX-RP-SMAM-SMAM-1509
Coaxial cable type extension, low loss KSR-400 (type LMR400), with RP-SMA Male to SMA Male connector for use from 0 to 6Ghz. The KSR400 coaxial is equivalent to the LMR-400 in terms of performance and
13,50 €
Reference: RFKONNECT-PCB-ATTENUATEUR-1011
This PCB-based RF attenuator module reduces the power of a radio signal by -10 to -30dB, with a maximum input power of 23dBm (200Mw), with female SMA connector, for use from 0 to 4000Mhz (4Ghz).
8,90 €
Reference: CABLE-COAXIAL-N-M-UHF-1M-2710
N Male to UHF Male coaxial cable with KSR195 low-loss 50 ohm coaxial cable for use from 0 to 6 GHz. Length: 1, 3, 5, 10, 15 or 20 metres (select below)Connector 1: N MaleConnector 2: UHF Male
12,03 €
Reference: RALL-COAXIAL-KSR400-NU-1508
KSR-400 low-loss coaxial cable (type LMR400) without connector with bare end, for use from 0 to 6Ghz. The KSR400 coaxial cable is equivalent to the LMR-400 in terms of performance and losses.
11,90 €
Reference: CABLE-COAXIAL-MCX-M-2M-4972
KSR195 5mm low-loss 50 ohm coaxial cable, for use from 0 to 6Ghz, with an MCX Male connector at one end and no connector at the other (bare end to be soldered or crimped). Length: 2, 5 or 10
1,73 €
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.