Equipement from manufacturer M0CVO Antennas

• 

  71,16 €

  Reference: M0CVO-MAG1-1875

  MAGITENNA 40 to 6m 400W CW and 550W PEP portable and fixed antenna

  This MAGITENNA wire antenna from M0CVO is the ideal solution for limited space, with only 7.6m length. With the special adapter unit it works from 40m to 6m with an internal tuner for most modern

  71,16 €
• 

  66,02 €

  Reference: M0CVO-HW40HP-1874

  HW-40HP M0CVO dipole HF multiband antenna 80/60/40/20/15/10m & 6m 400W

  The M0CVO HW-40HP is a dipole antenna that incorporates the M0CVO 4:1 balun at the feed point, allowing direct feeding with 50 ohm coaxial cable. The M0CVO HW-40HP is just 20.28m long, and can be

  66,02 €
• 

  65,93 €

  Reference: M0CVO-LW40-1877

  LW-40 long wire HF multiband antenna 160m to 6m 500W PEP

  The LW-40 is a 40.56m long wire antenna incorporating the M0CVO 9:1 UNUN at the feed point allowing it to be fed directly with a 50 ohm coaxial cable. This antenna is capable of operating on all HF

  65,93 €
• 

  64,35 €

  Reference: M0CVO-HW20HP-1872

  HW-20HP dipole HF OCFD antenna multiband 20/17/15/12/10m and 6m 400W PEP

  The M0CVO HW-20HP is an OFCD type dipole antenna that incorporates the M0CVO 4:1 balun at the feed point, allowing direct feeding with 50 ohm coaxial cable. At only 10.14 metres in length, it can be

  64,35 €
• 

  64,35 €

  Reference: M0CVO-LW20-1876

  LW-20 Long Wire HF Multiband Antenna 80m to 6m 400W PEP

  The M0CVO LW-20 is a 20m long wire antenna, operating on all bands from 80m - 6m via an external tuner. This antenna gives good results when space is limited. For full band coverage you will need an

  64,35 €
• 

  62,27 €

  Reference: M0CVO-41QRO-1883

  Balun 4:1 HF QRO 1.8 to 54Mhz 1kW M0CVO

  Balun 4:1 QRO for very high power M0CVO Antennas for Windom antennas, dipoles, fed loops or folded off centre. RF power of 1kW, for intermittent amateur use and not for continuous AM broadcast use nor

  62,27 €
• 

  62,27 €

  Reference: M0CVO-11QRO-1886

  Balun HF 1:1 QRO M0CVO 1.8-54Mhz 1kW (CW) 1.2kW (PEP)

  The 1:1 M0CVO very high power RF balun of 1kW (CW) and 1.2kW (PEP)*. It is used to adapt a balanced antenna, such as a dipole, to an unbalanced feed such as a coaxial cable. It also reduces the amount

  62,27 €
• 

  39,92 €

  Reference: M0CVO-91UNUN-1882

  Balun HF 9:1 UNUN M0CVO 1,8-54Mhz 400W PEP

  The M0CVO 9:1 UNUN Balun operates from 1.8 to 54MHz and supports up to 400W PEP (CW or SSB) and 50-60W max. en FT8, AM ou RTTY. It provides a power point for a long-wire radiating element and converts

  39,92 €
• 

  38,25 €

  Reference: M0CVO-11BALUN-1878

  Balun 1:1 M0CVO HF 1.8 to 30MHz 400W PEP

  The M0CVO high power 1:1 Balun operates from 1.8 to 30MHz. It can handle up to 400W PEP (CW or SSB). It is used to match a balanced antenna, such as a dipole, to an unbalanced feed such as coaxial

  38,25 €
• 

  38,25 €

  Reference: M0CVO-41BALUN-1879

  Balun 4:1M0CVO HF 1.8-54Mhz 400W PEP

  The M0CVO high power 4:1 Balun operates from 1.8 to 54MHz. It supports up to 400W CW or 500W PEP in SSB. It is used to convert the 200Ω impedance seen at the feed point of a bent or off-centre fed

  38,25 €