Sale!

-15%

XTRX PRO Embedded SDR 30MHz - 3.8GHz 2x2 MIMO Fairwaves SDR transceivers CROWD-XTRX-PRO-937 View larger

Fairwaves

CROWD-LIMESDR-XTRX-937

New product

USA

XTRX PRO Embedded SDR 30MHz - 3.8GHz 2x2 MIMO

rating No review at the moment

The XTRX PRO is the first embedded SDR in Mini PCI format and with RX and TX in Full-Duplex (2x2 MIMO) for frequencies from 30Mhz to 3.8Ghz, stabilized with integrated GPSDO, sampling rate up to 120 Mhz in 12-bit, transmission power from 0 to 10 dBm max. (depending on the frequency) and built-in SIM card reader.

The embedded SDR XTRX is mainly designed for R&D SDR and/or prototype to production needs in the field of GSM / LTE mobile (2G, 3G and 4G), it also allows to cover SDR applications in the amateur radio, drone or LoRa.

Optional Starter Pack: GPS antennas with cable, aluminum housing, USB adapter 3, PCIe x2 metal adapter, 4 U.FL - U.FL cables and 4 U.FL - SMA cables.

SDR software compatible: SDRangel, osmo-trx, Kalibrate and gr-osmosdr.

Comes with: 1 XTRX Pro (optional starter pack), Fairwaves genuine.

More details

628,15 € tax excl.

739,00 €

This material is no longer available

Data sheet

Specifications

RF Transceiver Chip: Lime Microsystems LMS7002M FPRF
FPGA: Xilinx Artix 7 35T / 50T (CS / Pro)
Channels: 2×2 MIMO
Output power: 0 to 10dBm depending on the frequency
12-bit sampling rate: 0.2 Mhz to 120 Mhz SISO / 90 Mhz MIMO
Adjustment range: 30 MHz - 3.8 GHz
RX / TX frequency: 10 MHz - 3.7 GHz and 100 kHz - 3.8 GHz with signal degradation
PCIe throughput: 2 to 8 Gbit / s depending on the type of PCI
GPSDO and Reference Clock (26 MHz)
Stability without GPS: 0.1 to 0.5ppm
Stability with GPS: 0.01ppm after GPS / GNSS lock
Card size: Mini PCIe
Connector antenna : 7x U.FL
Dimensions: 30 × 51mm

More info at : https://xtrx.io/

Reviews

Click here to leave a review

Additional or similar equipment

  • HackRF One SDR Transceiver TX RX 1-6000MHz - RF development board - Genuine Vers

    The HackRF One is a SDR receiver-transmitter covering from 1MHz to 6GHz in all available modes, analog and digital.Tip: For use in the lab, or with strong signals nearby, the sensitivity of the device

    319,00 € tax incl.

    265,83 €tax excl.

    In stock
  • Super Discone Antenna 25Mhz - 3Ghz Diamond D3000N

    Diamond D3000N discone antenna, ultra wide band covering in reception all frequencies 25Mhz to 3GHz, compact with only 1.7 meters high.Reception 25 to 3000 MHz Transmit 50/144/430/904/1200 MHz

    160,87 € tax incl.

    134,06 €tax excl.

    Out of stock, available in 2 to 3 months
  • GSM 700-2600Mhz magnetic antenna 9dbi

    Broadband omni-directional magnetic antenna from 700Mhz to 2600Mhz, high efficiency with a gain of 9dbi, fitted with an SMA male connector and a 3-metre RG174 cable. This antenna is particularly

    29,00 € tax incl.

    24,17 €tax excl.

    In stock
  • GSM / 3G / UMTS 5dBi clip antenna

    High-efficiency antenna with 5dbi gain, SMA male connector for GSM and multiband devices 3G, UMTSEDGE and GPRS. This 3G mobile broadband antenna is ideal for improving signal quality and transfer

    12,90 € tax incl.

    10,75 €tax excl.

    In stock
  • Discone antenna 300-3000 Mhz SIRIO SD 3000 N

    SIRIO SD 3000 N/U discone antenna, wide band covering all frequencies in reception from 300 to 3000 Mhz and the amateur radio bands 70cm, 23cm in transmission, with N female connector on the SD3000N

    95,00 € tax incl.

    79,17 €tax excl.

    In stock
  • USRP B210 70Mhz to 6Ghz Full Duplex SDR MIMO (2 Tx & 2 Rx)

    SDR Transceiver B210 wide-band from 70 MHz to 6 GHz without gap and with 56 MHz of instantaneous bandwidth on the screen, MIMO (2 Tx & 2 Rx). The Ettus USRP B210 operates in full duplex mode, MIMO

  • PlutoSDR RX & TX 325 MHz - 3.8 GHz Full-Duplex - SDR QO-100 REV C

    The PlutoSDR (Adalm-Pluto) REV C is an open-source SDR receiver and transmitter covering frequencies from 325MHz to 3.8GHz in half and full-duplex with a bandwidth of 20Mhz in 12bits.Adalm-Pluto was

    349,00 € tax incl.

    290,83 €tax excl.

    Out of stock, available in 7-10 days
  • NanoVNA-F VNA antenna analyzer 50KHz-1500MHz metal case - Deepelec

    The NanoVNA-F Deepelec version is the enhanced version of the open-source Antenna and Vector Network (VNA) analyzer that covers the HF, VHF and UHF bands from 50 KHz to 1500 MHz with metal case and

    129,00 € tax incl.

    107,50 €tax excl.

    Out of stock, backorder available in 2-3 weeks
  • TinySA Spectrum analyser and RF signal generator 100 Khz to 960 MHz (Erik Hugen)

    The tinySA is a mini portable spectrum analyser for the MF/HF/VHF bands from 100 KHz to 350 MHz and the UHF band from 240 MHz to 960 MHz in degraded mode.It features a switchable bandpass filter from

    69,00 € tax incl.

    57,50 €tax excl.

    Out of stock, available in 2 to 3 weeks
  • NanoVNA V2 VNA analyzer 50KHz to 3000MHz N or SMA plug + metal case

    The NanoVNA V2 SAA2N is an antenna and vector network (VNA) analyzer that covers the HF, VHF and UHF bands from 50 KHz to 3000 MHz, with N or SMA type connector and a metal case.It measures the

  • VNA Analyzer RigExpert Stick Pro 100 kHz to 600 MHz

    The RigExpert Stick Pro is a vector analyzer (VNA) of antennas and cables. The analyzer allows you to measure various parameters of antennas, cables, lines, filters and many more in the frequency

    465,00 € tax incl.

    387,50 €tax excl.

    Out of stock, available within 2 to 3 weeks
  • NANOVNA-F V2 3GHz Antenna Analyser 50kHz to 3000 MHz

    The NanoVNA-F V2 is a new-generation vector network analyser designed to be both portable and self-contained, with a wide range of features. The analyser is equipped with a 4.3" IPS LCD display, a

    195,00 € tax incl.

    162,50 €tax excl.

    In stock
  • CHELEGANCE JNCRADIO VNA 3G - 50kHz to 3GHz Aluminum case

    JNCRadio VNA 3G is a portable Vector Network Analyzer with frequency coverage 50kHz to 3GHz. Its a more advanced product built on top of the NanoVNA-F V2, with a much more powerful processor and new

    229,00 € tax incl.

    190,83 €tax excl.

    In stock
  • VNA SV4401A 4.4G 50kHz – 4.4GHz with 7” capacitive touchscreen & N connectors

    SV4401A is a handheld Vector Network Analyzer (VNA) with frequency range of 50kHz to 4.4GHz. It can be used for S11 and S21 measurements. The S21 dynamic range is 75 dB, while the S11 dynamic range is

    479,00 € tax incl.

    399,17 €tax excl.

    In stock
  • TinySA ULTRA Spectrum analyser & signal generator 100 Khz to 5.4 GHz

    The tinySA ULTRA is the new, more powerful version of the mini portable spectrum analyser, for the MF/HF/VHF bands from 100 KHz to 800 MHz and the UHF and SHF bands from 800 MHz to 5400 MHz in ULTRA

    169,00 € tax incl.

    140,83 €tax excl.

    In stock
  • LiteVNA64 VNA antenna analyser from 50KHz to 6.3GHz

    The LiteVNA64 is a touch-sensitive Vector Network Analyser (VNA) that offers advanced performance for HF, VHF, and UHF frequency testing, ranging from 50 KHz to 6.3 GHz. This is a significant upgrade

    219,00 € tax incl.

    182,50 €tax excl.

    In stock
  • KrakenSDR SDR receiver pack + 5x antennas for direction finding

    KrakenSDR is the enhanced version of KerberosSDR, an open-source multi-channel SDR receiver designed for direction finding, interferometry, triangulation and location analysis of RF signals from 100

    959,00 € tax incl.

    799,17 €tax excl.

    In stock

Delivery Europe & Overseas

Stock and shipped from France

Product return

14 days to return, 2 warranty

Email support

Response within 24h to 72h

Secure payment

SSL, VISA, Mastercard, Paypal

Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.