Viewed products
In 'normal' mode, this USB stick can be used to...
In 'normal' mode, this USB stick can be used to receive DTT channels, but it can also be used simply as a wideband VHF-UHF receiver-scanner from 24 Mhz to 1700 MHz in theory.
This is made possible by the Realtek RTL2832U chipset and R820T tuner fitted to this model of DTT USB stick, which provides bandwidth in all modes (AM, FM, FM wide, SSB, CW, DATA, DMR) from 50Mhz to 1.5Ghz, with no holes, in practice!
Supplied with : DTT key only (no remote control, no CD, no aerial to choose with MCX male connector).
We offer a Passion Radio SDR Pack ready to use with all the accessories you need, including the SDR converter for adding MF and HF bands from 0.5 to 50Mhz!
Manuel et guide en français d'installation et configuration du converter HF et du pack Radio SDR 3.61M
RTL-SDR drivers for Windows 7, 8, 10, 11. Check the latest version on: zadig.akeo.ie 5M
On the same computer, you must choose between using the USB key in DTT mode with the original drivers, or in SDR receiver-scanner mode, in which case you don't need to install the DTT drivers to use SDR.
The aerial connector on the USB key is MCX Female, to connect another aerial cable you will need an MCX Male connector.
To use this USB key in SDR scanner mode, we strongly recommend that you choose an antenna suited to the VHF and/or UHF frequency range to be listened to, and that you place the antenna outside, on a windowsill or, ideally, as high and unobstructed as possible on the roof.
Consult the range ofSDR antennas compatible with SMA, as well as the mounting brackets to suit your configuration and requirements in terms of frequencies to be listened to.
We offer a guide to installing SDR drivers quickly and easily: SDR software, drivers and installation guide to download from our website.
Reference: PIGTAIL-MCX-M-SMA-M-52
MCX Male to SMA Male pigtail adapter. Perfect for connecting the DTT dongle RTL3832 to the Ham it Up Ham it Up converter.
Reference: ADAPT-MCX-M-SMA-F-260
This RF adapter converts an MCX Male connector to an SMA Female connector. For example, to connect a DTT / SDR R820T2 key to an aerial with an SMA male connector.
Reference: CLE-RTLSDR-V4-2402
The RTL-SDR.com V4 USB SDR key incorporates the R828D tuner (instead of the R860 in V3) for reception from 500kHz to 1766 MHz.TCXO at 1 PPM Female SMA antenna connector Realtek RTL2832U chipset +
Reference: PIGTAIL-UHF-F-MCX-M-50
MCX Male to UHF Female adapter. The MCX connector is compatible with the DVB-T USB dongle. RG 316 50 ohm coaxial cable. Available in 15cm, 50cm or 1 metre lengths (choose below).
Reference: NOO-100721-HAM-IT-UP-PLUS-441
Nooelec's Ham It Up v1.3 is an up-converter HF, equipped with the 125Mhz filter soldered on the PCB and allows to listen to all MF / HF bands from 0.5 to 50 Mhz, in all modes of modulation, from a
Reference: PIGTAIL-UHF-F-MCX-M-50
MCX Male to UHF Female adapter. The MCX connector is compatible with the DVB-T USB dongle. RG 316 50 ohm coaxial cable. Available in 15cm, 50cm or 1 metre lengths (choose below).
Reference: PIGTAIL-BNC-F-MCX-M-51
MCX Male to BNC Female pigtail adapter. The MCX connector is the one used by the DVB-T DTT Dongle dongle we offer. RG 316 50 ohm coaxial cable. Available in 15cm, 50cm or 1 metre lengths (choose
Reference: PIGTAIL-MCX-M-SMA-M-52
MCX Male to SMA Male pigtail adapter. Perfect for connecting the DTT dongle RTL3832 to the Ham it Up Ham it Up converter.
Click here to leave a review
Be the first to ask a question about this product!
Nooelec's Ham It Up v1.3 is an up-converter HF, equipped with the 125Mhz filter soldered on the PCB and allows to listen to all MF / HF bands from 0.5 to 50 Mhz, in all modes of modulation, from a
62,50 €tax excl.
MCX Male to UHF Female adapter. The MCX connector is compatible with the DVB-T USB dongle. RG 316 50 ohm coaxial cable. Available in 15cm, 50cm or 1 metre lengths (choose below).
6,25 €tax excl.
MCX Male to BNC Female pigtail adapter. The MCX connector is the one used by the DVB-T DTT Dongle dongle we offer. RG 316 50 ohm coaxial cable. Available in 15cm, 50cm or 1 metre lengths (choose
5,75 €tax excl.
MCX Male to SMA Male pigtail adapter. Perfect for connecting the DTT dongle RTL3832 to the Ham it Up Ham it Up converter.
5,42 €tax excl.
New version of Passion Radio SDR pack with RTL2832U and new R820T2 tuner and new Ham It Up v1.3 that offers better sensitivity and selectivity. The pack Passion Radio SDR transforms a computer, PC or
82,50 €tax excl.
This model of RTL-SDR key is equipped with the Realtek RTL2832U chipset and the new R860 tuner, which is identical to the R820T2 tuner and has been specially designed for SDR mode. The antenna
21,58 €tax excl.
This RF adapter converts an MCX Male connector to a TV Female connector. RF adapter for connecting an indoor or outdoor TV aerial to equipment fitted with a female MCX connector, such as the R820T2
3,25 €tax excl.
This RF adapter converts an MCX Male connector to an SMA Female connector. For example, to connect a DTT / SDR R820T2 key to an aerial with an SMA male connector.
3,29 €tax excl.
This RF adapter converts an MCX Male connector to a UHF Female connector (SO239). For example, to connect a DTT / SDR R820T2 key to an aerial with a UHF male connector (PL259).
3,29 €tax excl.
The new Deluxe Passion Radio SDR V3 pack include: - 1 USB TNT SDR stick new release (RTL2832U + tuner R820T2) - 1 converter HF SDR Ham it Up 1.3 (new release) - 1 USB cable male A-B 2.0 of 1.5 meters
107,50 €tax excl.
Pigtail MCX Male to BNC Male adapter. RG 316 50 ohm coaxial cable, approx. 15 cm long.
2,29 €tax excl.
5,50 € -50%UHF Male to MCX Male adapter. The MCX connector is compatible with the DVB-T USB dongle. RG 316 50 ohm coaxial cable, approx. 15cm long.
2,58 €tax excl.
6,20 € -50%SMA Male to MCX Male coaxial cable with KSR195 low-loss 50 ohm coaxial cable for use from 0 to 6 GHz. Length: 1 or 5 metresConnector 1: SMA MaleConnector 2: MCX Male
8,25 €tax excl.
Telescopic antenna with magnetic base and male MCX connector for USB RTL-SDR dongle, the antenna operates on receive only from 100Mhz to approx. 500Mhz. Frequencies (reception only): 100-500Mhz
2,42 €tax excl.
The key NESDR SMART v5 is the new and improved version of the famous USB RTL-SDR dongle with the RTL2832U chipset and the R820T2/R860tuner, to receive all frequencies without gaps from 100kHz to
45,39 €tax excl.
This USB stick is the optimized V3 version of RTL-SDR.com, with the R860 tuner chip (exactly the same as R820T2*) for reception from 24 to 1766 MHz. The characteristics of the dongle RTL-SDR.com v3:-
38,26 €tax excl.
KSR195 5mm low-loss 50 ohm coaxial cable, for use from 0 to 6Ghz, with an MCX Male connector at one end and no connector at the other (bare end to be soldered or crimped). Length: 2, 5 or 10
1,44 €tax excl.
The NESDR SMARTee v2 is the version with the Bias-Tee function in addition to the NESDR Smart V4, equipped with the RTL2832U chipset and the R820T2 tuner which can receive from 25 to 1750MHz (without
47,04 €tax excl.
The RTL-SDR.com V4 USB SDR key incorporates the R828D tuner (instead of the R860 in V3) for reception from 500kHz to 1766 MHz.TCXO at 1 PPM Female SMA antenna connector Realtek RTL2832U chipset +
34,55 €tax excl.
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.