Selection of RF, preamplifiers, bandpass and stop band filters.
Reference: AA-6320-FILTER2M1500W-2686
Transmitter bandpass filter from Antennas Amplifiers for the 2m frequency band from 144 MHz to 148 MHz 1.5 kW, with insertion loss <0.1 dB, N female connector and maximum power 1500W. The BPF
Reference: AA-5960-FILTER6M-1500W-2705
The Antennas Amplifiers BPF bandpass filter for the 6m "magic" band covers 50 to 51MHz with a maximum power of 1500W, a very low insertion loss of 0.11 dB and N plug connectors. Although this filter
Reference: AA-6530-FILTERBPF450-2687
Band-pass filter Antennas Amplifiers for transmitting on the 70cm amateur radio frequency band from 430 to 450 MHz, <0.12 dB with high selectivity, high Q and very low loss, designed for 200 W
Reference: AA-6734-PREAMP-ADSB-3004
Low-noise 1090MHz outdoor ADS-B preamplifier, with +13.8dB gain, for outdoor use, with box and bracket supplied for mast mounting. ADS-B stands for Automatic Dependent Surveillance-Broadcast. ADS-B
195,83 €
Reference: AA-6675-PREAMPV2-3005
If you want to hunt for super-weak DX signals, in MS, EME, or during contesting, this low-noise 2m preamplifier with bandpass filter is the best choice for demanding users. The very low noise, the
165,83 €
Reference: AA-6720-PREAMP70CM-3002
Low-loss input bandpass filter for the 70cm band from 430 to 440MHz with PGA-103+ very low noise preamplifier, +20dB gain. The unit contains a high selectivity, high Q, low loss -0.13dB bandpass
Reference: AA-6670-PREAMP2M-3003
Low-loss input bandpass filter for the 2m band from 144 to 146MHz with PGA-103+ very low noise preamplifier, +25dB gain. The unit contains a high-selectivity, high-Q, low-loss -0.13dB bandpass filter
Reference: DIAMOND-CMF2000-1122
The Diamond CMF-2000 is a common mode filter that will prevent TVI and EMI CEM interference, caused by the transmission coaxial cable.Usable from 1 to 54 Mhz all bands, HF amateur radio, CB 27 Mhz,
129,08 €
Reference: NOOELEC-100799-NOAA-1061
This SawBird + filter from Nooelec is specially designed to operate on the NOAA 137 Mhz frequency band and for NOAA weather satellite reception applications.It makes it possible to significantly
47,54 €
Reference: F1OPA-WIDEBAND-LNA3-805
Wide-band LNA preamp, based on PGA-103+, to improve reception performance from 50 Mhz to 1500 Mhz, with a maximum gain of 20-24dB and a noise factor of 0.4dB.This VHF-UHF LNA offers a very good
Reference: OPA-LNAHF-HFLNA-284
The LNA HF from F1OPA is a pre-amplifier and a low-pass filter (LNA), very powerful (+18dB to +20dB), with SMA Female connectors, for HF frequencies and short waves from 500 kHz to 30 MHz, with
29,58 €
Reference: NOO-100813-FLAMINGO-2539
The Flamingo v2 FM is a high-attenuation FM notch filter, shielded against electromagnetic interference by a custom anodised aluminium housing.+70dB attenuation in the FM band FM Broadcast radio
Reference: NOOELEC-100722-OUTERNET-467
This LNA and SAW filter from Nooelec is specially designed to operate on 1.5Ghz Outernet frequency band and for Inmarsat radio applications, covering from 1.50GHz to 1.58GHz. It significantly
Reference: RFKONNECT-FILTRE-81T611-2221
88 - 108MHz Band Stop Filter High Performance Band Stop Broadcast FM reject Filter with SMA Female Connector- Blocks the broadcast FM band between 88 - 108 MHz with over 50dB of attenuation. It is
Reference: FILTRE-SAW1-ADSB-OPA-804
This ADS-B bandpass/cut filter for 1090Mhz allows to improve the performance and the selectivity of the signal in ADS-B reception and to suppress the signals outside the 1090Mhz band.Delivered with :
Reference: FILTRE-SAW2-868-F1OPA-830
This filter for the 868 MHz bandpass allows to improve the selectivity of the reception and to suppress the parasitic signals outside the 868MHz band and in particular to reject the GSM 900 MHz
Reference: FILTRE-SAW-QO100-F1OPA-824
This bandpass filter for the 2.4 Ghz (13cm) allows to reject the local oscillator and harmonics frequencies of the Up-Converter for QO-100 to get a clean signal on the satellite, with a max. input
Reference: FILTRE-RTLSDR-FM-473
This band-cut filter is design by RTL-SDR.com, it blocks and reject broadcast FM band between 88 to 108 MHz with over 50dB of attenuation. Insertion loss is less than 0.5 dB between 0-1 GHz, and less
Reference: FILTRE-RTLSDR-523
This high-pass notch filter is designed by RTL-SDR.com and rejects the AM broadcast from 500 kHz to 1.7 MHz, with attenuation of more than 50dB. In fact, because of the attenuation, the filter is
Reference: RFKONNECT-FILTRE-81T610-2220
1090MHz ADS-B+LAN Bandpass Filter Module with Integrated Preamplifier High Performance Bandpass FilterSpecification :- Frequency range : 1G - 1.2GHz- Size : 105 x 45.7mmIncluded in the package :- 1 x
Reference: RF-KONNECT-87T298-SPF5189Z-833
This SPF5189Z LNA preamp improves reception performance from 50 Mhz to 4000 Mhz, based on SPF5189Z, with a noise factor of 0.6 dB and a maximum gain of approximately 20dB.This low noise amplifier is
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.