No products
New products
-
2.4GHz TX 2.5W Max Bidirectional Amplifier + 10dB RX Preamp
259,00 € tax excl. -
-
Switching power supply MOONRAKER SM-30II 30A
99,00 € tax excl. -
USB CAT & PTT Control Interface Digirig DR-891 for YAESU FT-891
99,00 € tax excl.
Viewed products
-
TTGO T-display S3...
The TTGO T-display S3 is a wireless development...
-
Coaxial cable extension KSR400 type LMR400 RP-SMA Male N Female
6,75 € -50% 13,50 €
TTGO T-display S3 ESP32-S3 WIFI BT 5.0 development board with 1.9" TFT IPS LCD screen
No review at the momentThe TTGO T-display S3 is a wireless development board with an ESP32-S3 WIFI BT 5.0 microprocessor, a 1.9-inch ST7789 TFT IPS LCD screen and a case.
- MCU: ESP-S3
- 16 MB Flash memory
- 8 MB PSRAM
- Wireless connectivity: Wi-Fi 802.11 and Bluetooth 5.0 + BT mesh
- Programming platform: Arduino-ide and Micropython
- On-board functions : Boot+Reset+IO14 button
- Screen type: TFT IPS LCD
- Size: 1.9 inches
- Resolution: 170(H)*320(V)
- Power supply: 3.3V - 5V via USB-C or external battery/power supply (not included).
- Dimensions: 62 x 26 x 10 mm
Supplied with: 1 LILYGO TTGO T-display S3 with case. Available in 2 versions with PIN already soldered or not (choose the version below).
Find configuration information on Github.
Data sheet
Customers also bought
13,90 €Reference: TTGO-DEVBOARD-ESP32B-Q224-895
TTGO T-DISPLAY ESP32 BLE WIFI LCD board for Arduino
TTGO ESP32 T-Display development board for Arduino, based on the ESP32 microprocessor (dual-core 32-bit) and incorporating an 802.11 b/g/n WIFI connection , Bluetooth and a 2.4cm LCD screen, 4MB
13,90 €
19,96 €Reference: RFKONNECT-SONDE-81T625-2231
EMC EMI RF 9 KHz to 3 GHz probe kit SMA connector
PROBE EMC EMI Near Field Conduction Simple Magnetic Field Probe Kit with SMA ConnectorSpecification:- Working frequency: 9K - 3G- Weight: 21g- Connector: SMA female (SMA-K)Included in the package:- 5
19,96 €
34,90 €Reference: GSG-HACKRF-ANT500-74
ANT500 SDR ADSB antenna 75-1000Mhz SMA-M
Telescopic antenna ANT500, VHF-UHF 50 ohms designed to operate in RX from 75 MHz to 1 GHz. Configurable length of 20 cm to 88 cm. Stainless steel SMA male connector and elbow swivel 360 °. This is an
34,90 €Online only
5,00 €Reference: ADAPT-SMA-M-BNC-F-85
SMA Male BNC Female Adapter
SMA Male to BNC Female adapter. Compatible with Ham It Up HF converter card, HackRF and the SDR receiver FUNcube Dongle Pro+ receiver.
5,00 €
We also recommend
- 13,90 €
Reference: TTGO-DEVBOARD-ESP32B-Q224-895
TTGO T-DISPLAY ESP32 BLE WIFI LCD board for Arduino
TTGO ESP32 T-Display development board for Arduino, based on the ESP32 microprocessor (dual-core 32-bit) and incorporating an 802.11 b/g/n WIFI connection , Bluetooth and a 2.4cm LCD screen, 4MB
13,90 € 
24,90 €Reference: TTGO-MODULE-ESP32-GPRS-Q336-896
T-CALL V1.4 TTGO ESP32 GPRS SIM800H Bluetooth WIFI module Arduino
Arduino TTGO ESP32 T-Call V1.4 module with GPRS and SIM card support, based on the ESP32 microprocessor and with WIFI 802.11 b/g/n connection , Bluetooth 4.2 and GPRS SIM800H module. Compatible with
24,90 €
36,48 €Reference: TTGO-LORA868-PAX1-Q168-897_8
LoRa Tracker module 433 or 868 MHz Paxcounter BLE WIFI LoRaWan
This LoRa tracker is an IoT development board for LoRa 433 Mhz or 868 Mhz frequencies (depending on the model), with LoRaWAN enabled and WIFI 802.11 b/g/n connection , Bluetooth/BLE, 2.4cm OLED
36,48 €
55,68 €Reference: TTGO-LORA433-T-BEAM-V2-Q408-2418
TTGO T-BEAM V1.2 Meshtastic LoRa 433 MHz development board SX1278 ESP32 WiFi BT GPS
IoT development board for the LoRa 433 MHz ISM band and the LoRa amateur radio band, with 802.11 b/g/n WIFI connection , Bluetooth/BLE 4.2, soldered 2.4cm OLED display, GPS module and battery holder
55,68 €
Reviews
Additional or similar equipment
-
TTGO T-DISPLAY ESP32 BLE WIFI LCD board for Arduino
TTGO ESP32 T-Display development board for Arduino, based on the ESP32 microprocessor (dual-core 32-bit) and incorporating an 802.11 b/g/n WIFI connection , Bluetooth and a 2.4cm LCD screen, 4MB
13,90 € tax incl.In stock11,58 €tax excl.
-
T-CALL V1.4 TTGO ESP32 GPRS SIM800H Bluetooth WIFI module Arduino
Arduino TTGO ESP32 T-Call V1.4 module with GPRS and SIM card support, based on the ESP32 microprocessor and with WIFI 802.11 b/g/n connection , Bluetooth 4.2 and GPRS SIM800H module. Compatible with
24,90 € tax incl.In stock20,75 €tax excl.
-
LoRa Tracker module 433 or 868 MHz Paxcounter BLE WIFI LoRaWan
This LoRa tracker is an IoT development board for LoRa 433 Mhz or 868 Mhz frequencies (depending on the model), with LoRaWAN enabled and WIFI 802.11 b/g/n connection , Bluetooth/BLE, 2.4cm OLED
36,48 € tax incl.In stock30,40 €tax excl.
TTGO T-BEAM V1.0 LoRa GPS Tracker 433 / 868 Mhz Bluetooth WIFI
This TTGO T BEAM V1.0 LoRa tracker is an IoT development board for LoRa 433 Mhz or 868 Mhz frequencies (depending on the model), with 802.11 b/g/n WIFI connection , Bluetooth/BLE, 2.4cm OLED screen
47,90 € tax incl.In stock39,92 €tax excl.
OLED screen LILYGO 0.96" 128x64 OLED display module for T-BEAM and T-SIM
OLED LILYGO screen compatible with TTGO T-BEAM and T-SIM development boards.Screen type: OLED Size: 0.96 inches Resolution: 128*64 Colour: White Viewing angle: > 160 Driver IC: SSD1306 Power
5,71 € tax incl.In stock4,76 €tax excl.
-
TTGO T-BEAM V1.2 Meshtastic LoRa 433 MHz development board SX1278 ESP32 WiFi BT
IoT development board for the LoRa 433 MHz ISM band and the LoRa amateur radio band, with 802.11 b/g/n WIFI connection , Bluetooth/BLE 4.2, soldered 2.4cm OLED display, GPS module and battery holder
55,68 € tax incl.Out of stock, available within 1 month46,40 €tax excl.
TTGO T-BEAM V1.2 Meshtastic LoRa 868 MHz Card SX1276 ESP32 WiFi BT GPS
IoT development board for the LoRa 868 MHz ISM band, with 802.11 b/g/n WIFI connection , Bluetooth/BLE 4.2, soldered 2.4cm OLED display, GPS module and battery holder (battery not included). With
59,52 € tax incl.In stock49,60 €tax excl.
TTGO T-Echo LoRa Meshtastic WIFI BT5 GPS development board + screen & case
LILYGO TTGO T-Echo is the advanced version of the T-BEAM development board, and has been optimised for Bluetooth and power consumption, thanks to Meshtastic firmware optimisation and the use of the
98,68 € tax incl.In stock82,23 €tax excl.
T-TWR Plus VHF or UHF walkie talkie DEV board ESP-32 OpenEdition + WIFI BT GPS
The LILYGO TTGO T-TWR PLUS 2.0 is an ESP32-S3 development board with an integrated VHF or UHF walkie-talkie module and support for Wi-Fi 4, Bluetooth 5.0, GPS, OpenEdition* (compatible with OpenRTX,
44,84 € tax incl.In stock37,37 €tax excl.
89,68 € -50%
Delivery Europe & Overseas
Stock and shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal
Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.