Viewed products
The Signalink SLCAB13K radio interface cable...
The Signalink SLCAB13K radio interface cable can be used with the Signalink USB sound card and with almost all Kenwood radios which have a 13-pin mini-DIN data port (DATA socket). This includes, but is not limited to, the radios listed below.
The jumper module compatible with this cable bears the reference: SLMOD13K.
If in doubt, check the guide below by searching the PDF download document to find the correct cable and jumper module reference for your radio.
Supplied with: 1 Signalink SLCAB-13K radio cord.
Guide in French to choose the right radio cable and jumper according to the brand and model of the radio used. 177.6k
Guide in English to choose the right radio cable and jumper according to the brand and model of the radio used. 666.13k
Kenwood | TS-680S |
TS-690 | |
TS-850 | |
TS-870 | |
TS-940 | |
TS-950 | |
TS-990 | |
TS-2000 | |
TS-2000X | |
TS-140S | |
TS-440 | |
TS-440SAT | |
TS-450 | |
TS-570 | |
TS-570D | |
TS-570DG | |
TS-570S | |
TS-570SG | |
TS-590S | |
TS-590SG |
Reference: SIGNALINK-JUMPER-SLMOD13K-1490
The Signalink SLMOD13K Jumper module is compatible for use with the Signalink USB sound card and with virtually all Kenwood radios that have a 13-pin mini-DIN data port (DATA socket). This includes,
Reference: CABLE-RG58-BNC-UHF-50CM-1117
Coaxial patch cable with BNC Male - UHF Male connector (PL-259) with RG58 MIL-C-17 50 ohm coaxial cable for use in frequencies from 0 to 1000Mhz. Available in different lengths: 50cm, 1m or 2 metres.
Reference: ADAPT-N-F-UHF-M-251
RF adapter for N female to UHF male connector (PL-259). Impedance 50 ohms, gold-plated.
Reference: NAGOYA-UHFPU213-PL259-11MM-375
PL259 long socket connector (UHF male) for coaxial cable 11mm weld.
Reference: TIGER-SIGNALINK-BOITIER-1455
The Signalink USB radio interface from Tigertronics is a USB sound card that allows you to receive and transmit from a computer to practice digital modes such as SSTV, RTTY, Packet, PSK, ROS, FT8,
Reference: SIGNALINK-CABLE-SLCAB13I-1487
The Signalink SLCAB13I radio interface cable can be used with the Signalink USB sound card and with practically all ICOM radios which have a 13-pin mini-DIN data port (DATA socket). This includes, but
Reference: SIGNALINK-JUMPER-SLMOD13I-1488
The Signalink SLMOD13I Jumper module is compatible for use with the Signalink USB sound card and with virtually all ICOM radios that have a 13-pin mini-DIN data port (DATA socket) IC-78, IC-703,
Reference: SIGNALINK-JUMPER-SLMOD13K-1490
The Signalink SLMOD13K Jumper module is compatible for use with the Signalink USB sound card and with virtually all Kenwood radios that have a 13-pin mini-DIN data port (DATA socket). This includes,
Click here to leave a review
Be the first to ask a question about this product!
The Signalink USB radio interface from Tigertronics is a USB sound card that allows you to receive and transmit from a computer to practice digital modes such as SSTV, RTTY, Packet, PSK, ROS, FT8,
120,83 €tax excl.
The Signalink SLCAB13I radio interface cable can be used with the Signalink USB sound card and with practically all ICOM radios which have a 13-pin mini-DIN data port (DATA socket). This includes, but
29,08 €tax excl.
The Signalink SLMOD13I Jumper module is compatible for use with the Signalink USB sound card and with virtually all ICOM radios that have a 13-pin mini-DIN data port (DATA socket) IC-78, IC-703,
10,75 €tax excl.
The Signalink SLMOD13K Jumper module is compatible for use with the Signalink USB sound card and with virtually all Kenwood radios that have a 13-pin mini-DIN data port (DATA socket). This includes,
10,75 €tax excl.
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.