No products
New products
-
2.4GHz TX 2.5W Max Bidirectional Amplifier + 10dB RX Preamp
259,00 € tax excl. -
-
Switching power supply MOONRAKER SM-30II 30A
99,00 € tax excl. -
USB CAT & PTT Control Interface Digirig DR-891 for YAESU FT-891
99,00 € tax excl.
Viewed products
-
ICOM RJ-45 cable for...
Digirig Mobile Rev 1.6+ data modes cable for...
-
INRICO T-320 V2 3500mAh Android 8.1 GPS 4G LTE WIFI PoC Walkie Talkie
194,65 € -15% 229,00 €
View larger 
DIGIRIG-ICOMRJ45MOBILE-2942
New product
Digirig is an integrated open-source digital interface for amateur radio, developed by Denis from K0TX.
Designed to simplify connections between radios on the one hand, and computers, tablets or smartphones on the other.
The interface combines a USB hub, an audio codec and a CAT (Computer Aided Transceiver) interface in a compact package.
This all-in-one solution is designed to reduce cable clutter and improve the experience of radio operators, both in fixed stations and in mobile or portable environments.
Online only
ICOM RJ-45 cable for Digirig Mobile
No review at the momentDigirig Mobile Rev 1.6+ data modes cable for Mobile ICOM transceivers using RJ-45 mic jack and 3.5mm TRS speaker connector.
- This cable works with ICOM and other mobile transceivers using RJ-45 mic jack and 3.5mm TRS speaker connector.
- The data cable supports digital modes and packet radio protocols such as FT8, FT4, SSTV, APRS, Echolink, Allstar, etc.
- ideal for working with satellites (e.g. APRS and SSTV)
- the data cable combines audio and PTT control and plugs into the Digirig's audio socket
- the coiled cable keeps things tidy, avoiding knots and kinks
- coiled part is ~24″ relaxed, 72″ fully stretched, mic cable is ~6″, speaker cable is ~18″.
- RF shielded and muffled with ferrite balls at both ends to avoid radio interference.
- premium materials and craftsmanship
Audio cable requires Digirig Mobile Revision 1.6 or later (any configuration).
Data sheet
Compatible with :
Alinco DR-605, Alinco DR-605E, Alinco DR-735T
ICOM HM-133V, IC-207H, IC-208H, IC-2100H, IC-2200H, IC-2300H, IC-2702H, IC-2710H, IC-2720H, IC-2725E, IC-2730, IC-2730A, IC-2800H, IC-2820H, IC-E208, IC-E2820, IC-E880, IC-F110, IC-F111, IC-F121, IC-F1721, IC-F5021, IC-F6021, IC-V3500, IC-V8000, ID-4100A, ID-4100E, ID-5100, ID-5100a, ID-5100e, ID-800H, ID-880H.
Customers also bought
No products availableWe also recommend
149,00 €Reference: MICRO-YAESU-MICRO-M70-1009
Yaesu M-70 8-pin table microphone and RJ45
YAESU M-70 (ex. MD-100 A8X) desktop microphone for Yaesu HF equipment with 8-pin microphone plug or RJ45 with the 8-pin > RJ45 adapter included.8 pins and RJ45 connector (included) Supply
149,00 €
34,90 €Reference: SIGNALINK-CABLE-SLCABRJ4-1495
Signalink SLCAB-RJ4 radio cable micro RJ45 socket for Alinco Icom Kenwood Yaesu Anytone
The Signalink SLCABRJ4 radio interface cable can be used with the Signalink USB sound card and with practically all Alinco , ICOM, Kenwood, Yaesu radios and Anytone AT-578UV (V1 et V2). This radio
34,90 €
37,90 €Reference: DIGIRIG-ICOMMOBILE-2953
Digirig cable for Icom IC-706 IC-7300 IC-706MKIIG IC-7100
Digirig cables compatible with ICOM IC-7000, IC-703, ICOM IC-706, ICOM IC-706MKII, IC-706MKIIG, IC-7100, IC-718, IC-7200, IC-7300, IC-7410, IC-78, IC-9100, IC-970A, IC-970E, IC-970H.
37,90 €Online only
29,90 €Reference: YAESU-CORD-M70-S8100535-2273
Yaesu M-70 table microphone lead with 8-pin connector and RJ45
Replacement lead for Yaesu M-70 table microphone with 8-pin connector and RJ45. Also compatible with MD-100A8X / MD-200 and MH-31B8J handheld microphone.
29,90 €
Reviews
Additional or similar equipment
-
Yaesu M-70 8-pin table microphone and RJ45
YAESU M-70 (ex. MD-100 A8X) desktop microphone for Yaesu HF equipment with 8-pin microphone plug or RJ45 with the 8-pin > RJ45 adapter included.8 pins and RJ45 connector (included) Supply
149,00 € tax incl.In stock124,17 €tax excl.
-
Signalink SLCAB-RJ4 radio cable micro RJ45 socket for Alinco Icom Kenwood Yaesu
The Signalink SLCABRJ4 radio interface cable can be used with the Signalink USB sound card and with practically all Alinco , ICOM, Kenwood, Yaesu radios and Anytone AT-578UV (V1 et V2). This radio
34,90 € tax incl.In stock29,08 €tax excl.
-
Yaesu M-70 table microphone lead with 8-pin connector and RJ45
Replacement lead for Yaesu M-70 table microphone with 8-pin connector and RJ45. Also compatible with MD-100A8X / MD-200 and MH-31B8J handheld microphone.
29,90 € tax incl.In stock24,92 €tax excl.
ICOM OPC-589 RJ45 8-pin micro socket adapter for IC-2730E IC-7800 IC-746 IC-7000
8-pin microphone socket to Rj45 socket adapter ICOM OPC-589. Compatible with the following devices: IC-2730E, IC-7800, IC-746, IC-7000, IC-7100, ID-5100E. Compatible accessories: SM-50, SM-30, HM-219,
25,00 € tax incl.In stock20,83 €tax excl.
ICOM OPC-647 microphone extension lead 2.5m for IC-2730E ID-5100E ID-4100E IC-28
Microphone extension lead (2.5m) ICOM OPC-647. Compatible with the following devices: IC-2730E, ID-5100E, ID-4100E, IC-2800H, IC-2710H, IC-2200H, IC-2100H. Available in 5m: OPC-440
58,80 € tax incl.In stock49,00 €tax excl.
ICOM OPC-440 RJ45 microphone extension lead 5m for IC-2730E ID-5100E
ICOM OPC-440 5m microphone extension lead with RJ45 connector. Compatible with the following devices: IC-2730E, ID-5100E, ID-4100E, IC-2800H, IC-2710H, IC-2200H, IC-2100H. Available in 2.50m: OPC-647.
87,22 € tax incl.In stock72,68 €tax excl.
Yaesu FT-2500M Cable for Digirig Mobile
Digirig Mobile 1.6+ cable for Yaesu FT-2500M and other Yaesu transceivers using an RJ-45 connector with the same pinout.Coiled cables keep things tidy by avoiding knots and kinks. Provides audio
25,90 € tax incl.Out of stock21,58 €tax excl.
HT ICOM cable for Digirig Mobile
Digirig Mobile Rev 1.6+ Audio/PTT cable for ICOM HTs using dual 3.5mm/2.5mm connectors with 10mm spacing.The data cable supports digital modes and packet radio protocols such as FT8, FT4, SSTV,
25,90 € tax incl.Out of stock21,58 €tax excl.
ICOM DIN8 Digirig Cable Set
Digirig Mobile 1.6+ cables for ICOM transceivers using DIN8 and 3.5mm TRS connectorscoiled cables keep things tidy by avoiding knots and kinks one DIN8 audio/PTT cable and one 3.5mm TRS CI-V serial
37,90 € tax incl.Out of stock31,58 €tax excl.
Digirig Mobile USB interface for digital modes with CAT PTT & audio control
Digirig is an integrated USB interface for digital amateur radio modes (FT8, SSTV, RTTY, CW, VARA, etc.) combining an audio codec, a CAT serial interface and PTT control. All you need is a simple USB
69,00 € tax incl.Out of stock57,50 €tax excl.
-
Digirig cable for Icom IC-706 IC-7300 IC-706MKIIG IC-7100
Digirig cables compatible with ICOM IC-7000, IC-703, ICOM IC-706, ICOM IC-706MKII, IC-706MKIIG, IC-7100, IC-718, IC-7200, IC-7300, IC-7410, IC-78, IC-9100, IC-970A, IC-970E, IC-970H.
37,90 € tax incl.Out of stock31,58 €tax excl.
Delivery Europe & Overseas
Stock and shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal
Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.