Viewed products
This jumper module is compatible with virtually...
This jumper module is compatible with virtually all Yaesu radios that use an 8 pin round type mic jack. This includes but is not limited to the radios listed below.
The radio cable compatible with this jumper module has the reference: SLUSB8R .
Supplied with: 1 Signalink SLMOD-8RY Jumper module
Guide in French to choose the right radio cable and jumper according to the brand and model of the radio used. 177.6k
Guide in English to choose the right radio cable and jumper according to the brand and model of the radio used. 666.13k
YAESU
FT-107 / 107M
FT-726R
FT-736 / 736R
FT-747/757
FT-757GX / 767GX
FT-840
FT-847
FT-890
FT-920
FT-950
FT-980
FT-990
FT-1000 / 1000D
FT-1000MP
FT-DX1200
FT-DX5000
FT-2000
FT-5100
G1 / G2 Jumper Settings - To maintain compatibility with as many radios as possible, this jumper module has two small jumpers that can be set to provide additional ground ("G") connections required by some radios (see below). These two jumpers should be installed as follows for the following radios only. Do * NOT * install either jumper if your radio is not listed below:
- The two jumpers "G1" and "G2" must be installed for the FT-890, FT-980, FT-990, FT-1000 and the FT-1000D.
- Only the "G1" jumper should be installed for the FT-847, FT-920, FT-950, FT-1000MP, FT-DX1200, and FT-DX5000.
Reference: SIGNALINK-CABLE-SLCAB8R-1493
The Signalink SLCAB8R radio interface cable can be used with the Signalink USB sound card and with virtually all Alinco, Elecraft, ICOM, Kenwood and Yaesu radios that have an 8-pin micro plug . This
Reference: SIGNALINK-CABLE-SLCAB6PM-1478
The Signalink SLCAB6PM radio interface cable can be used with the Signalink USB sound card and with virtually all ICOM, Kenwood and Yaesu radios which have a 6-pin mini-DIN data port (DATA socket).
Reference: SIGNALINK-JUMPER-SLMODHT-2411
This jumper module is compatible with the QRP ICOM IC-705 mobile and the radio cable with reference: SLCAB705. Supplied with: 1 Signalink SLMODHT jumper module.
Reference: SIGNALINK-CABLE-SLCAB705-2410
The Signalink SLCAB705 radio interface cable can be used with the Signalink USB sound card and the ICOM IC-705. This radio cable has a right-angle microphone plug and an RJ45 socket. The jumper module
Reference: MICRO-YAESU-MICRO-M70-1009
YAESU M-70 (ex. MD-100 A8X) desktop microphone for Yaesu HF equipment with 8-pin microphone plug or RJ45 with the 8-pin > RJ45 adapter included.8 pins and RJ45 connector (included) Supply
Reference: YAESU-MH-31B8-1330
Yaesu MH-31B8 handheld microphone with 8-pin connector for Yaesu FTDX-9000 FTDX-5000 FTDX-3000 and FTDX-1200 sets. Also compatible with :FT-767DXFT-747GX
Reference: SIGNALINK-CABLE-SLCAB8PD-1485
The Signalink SLCAB8PD radio interface cable can be used with the Signalink USB sound card and with practically all ICOM, Ten-Tec radios which have an 8-pin mini-DIN data port (DATA socket). This
Reference: SIGNALINK-JUMPER-SLMOD8PD-1486
The Signalink SLMOD8PD Jumper module is compatible for use with the Signalink USB sound card and with virtually all ICOM radios which have an 8-pin mini-DIN data port (DATA socket). This module is
Click here to leave a review
Be the first to ask a question about this product!
YAESU M-70 (ex. MD-100 A8X) desktop microphone for Yaesu HF equipment with 8-pin microphone plug or RJ45 with the 8-pin > RJ45 adapter included.8 pins and RJ45 connector (included) Supply
124,17 €tax excl.
Yaesu MH-31B8 handheld microphone with 8-pin connector for Yaesu FTDX-9000 FTDX-5000 FTDX-3000 and FTDX-1200 sets. Also compatible with :FT-767DXFT-747GX
35,83 €tax excl.
The Signalink SLCAB8PD radio interface cable can be used with the Signalink USB sound card and with practically all ICOM, Ten-Tec radios which have an 8-pin mini-DIN data port (DATA socket). This
29,08 €tax excl.
The Signalink SLMOD8PD Jumper module is compatible for use with the Signalink USB sound card and with virtually all ICOM radios which have an 8-pin mini-DIN data port (DATA socket). This module is
10,75 €tax excl.
The Signalink SLCAB8R radio interface cable can be used with the Signalink USB sound card and with virtually all Alinco, Elecraft, ICOM, Kenwood and Yaesu radios that have an 8-pin micro plug . This
29,08 €tax excl.
This jumper module is compatible with virtually all ICOM radios that use an 8 pin round type mic jack. This includes but is not limited to the radios listed below. The radio cable compatible with this
10,75 €tax excl.
This jumper module is compatible with virtually all Kenwood and Alinco radios that use an 8 pin round type mic jack. This includes but is not limited to the radios listed below. The radio cable
10,75 €tax excl.
The Signalink SLCAB8PM radio interface cable can be used with the Signalink USB sound card and with practically all Xiegu radios which have an 8-pin mini-DIN data port (DATA socket). This includes,
29,08 €tax excl.
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.