No products
New products
-
2.4GHz TX 2.5W Max Bidirectional Amplifier + 10dB RX Preamp
259,00 € tax excl. -
-
Switching power supply MOONRAKER SM-30II 30A
99,00 € tax excl. -
USB CAT & PTT Control Interface Digirig DR-891 for YAESU FT-891
99,00 € tax excl.
Viewed products
-
Jumper Signalink...
This jumper module is compatible with virtually...
-
TECSUN PL606 pll dsp portable radio
39,01 € -20% 48,77 €
Jumper Signalink SLMOD-8RI for 8 pin micro socket for ICOM
Read the reviewThis jumper module is compatible with virtually all ICOM radios that use an 8 pin round type mic jack. This includes but is not limited to the radios listed below.
The radio cable compatible with this jumper module has the reference: SLCAB8R .
Supplied with: 1 Signalink SLMOD-8RI Jumper module
Download
Guide in French to choose the right radio cable and jumper according to the brand and model of the radio used. 177.6k
Guide in English to choose the right radio cable and jumper according to the brand and model of the radio used. 666.13k
Data sheet
ICOM
IC-1201/1271/1275
IC-22U / 25/27/28
IC-228/229 / 251AE
IC-255/260/271/290
IC-2400/2500
IC-37A / 38A / 375
IC-3200/3210/3220
IC-45/47/48
IC-471/475/490
IC-505/551/560/575
IC-707/718/720/725/726
IC-728/729/730/735
IC-736/737/738/740/745
IC-746 / 746PRO
IC-756 / 756PRO
IC-756PROII / PROIII
IC-7300/7400/7700/7800
IC-751/761/765/775/781
IC-820H / 901/910
PWR / SPKR Jumper Settings - To maintain compatibility with as many radios as possible, this jumper module has two small jumpers that can be set to activate power and the audio speaker.
PWR - This jumper is * NOT * used with the SignaLink USB, but can be installed to power the older SignaLink SL-1 or SL-1 + model from your radio if there is sufficient power available on it. Mic connector pin # 2 (check your radio manual).
SPKR - This jumper should only be installed if your radio has an audio speaker on pin # 8 of the Mic jack (check your radio manual). If the audio speaker is not available, you will need to connect an audio cable between the radio and the SignaLink as described in the SignaLink installation manual.
Customers also bought
34,90 €Reference: SIGNALINK-CABLE-SLCAB8R-1493
Signalink SLCAB-8R micro 8-pin radio cord Alinco Elecraft Icom Kenwood Yaesu
The Signalink SLCAB8R radio interface cable can be used with the Signalink USB sound card and with virtually all Alinco, Elecraft, ICOM, Kenwood and Yaesu radios that have an 8-pin micro plug . This
34,90 €
145,00 €Reference: TIGER-SIGNALINK-BOITIER-1455
Signalink USB from Tigertronics Radio interface & sound card for digital modes
The Signalink USB radio interface from Tigertronics is a USB sound card that allows you to receive and transmit from a computer to practice digital modes such as SSTV, RTTY, Packet, PSK, ROS, FT8,
145,00 €
We also recommend
149,00 €Reference: MICRO-YAESU-MICRO-M70-1009
Yaesu M-70 8-pin table microphone and RJ45
YAESU M-70 (ex. MD-100 A8X) desktop microphone for Yaesu HF equipment with 8-pin microphone plug or RJ45 with the 8-pin > RJ45 adapter included.8 pins and RJ45 connector (included) Supply
149,00 €
43,00 €Reference: YAESU-MH-31B8-1330
Yaesu MH-31B8 handheld microphone with 8 pins
Yaesu MH-31B8 handheld microphone with 8-pin connector for Yaesu FTDX-9000 FTDX-5000 FTDX-3000 and FTDX-1200 sets. Also compatible with :FT-767DXFT-747GX
43,00 €
34,90 €Reference: SIGNALINK-CABLE-SLCAB8PD-1485
Signalink SLCAB-8PD Mini-DIN 8-pin DATA radio cable for Icom Ten-Tec
The Signalink SLCAB8PD radio interface cable can be used with the Signalink USB sound card and with practically all ICOM, Ten-Tec radios which have an 8-pin mini-DIN data port (DATA socket). This
34,90 €
12,90 €Reference: SIGNALINK-JUMPER-SLMOD8PD-1486
Jumper Signalink SLMOD-8PD for Icom Mini DIN Data 8-pin
The Signalink SLMOD8PD Jumper module is compatible for use with the Signalink USB sound card and with virtually all ICOM radios which have an 8-pin mini-DIN data port (DATA socket). This module is
12,90 €
Reviews
Mais PAS DE DOC
Bonjour,
Merci d'avoir pris le temps de rédiger un avis. Vous pouvez trouver tous les manuels, guides d'installation et de câblage directement sur notre site.
Rendez-vous dans la section "Télécharger" de la fiche du matériel concernée pour accéder aux documents. Si vous avez besoin d'assistance supplémentaire, n'hésitez pas à nous contacter.
Cordialement
Service Client Passion Radio
Additional or similar equipment
-
Yaesu M-70 8-pin table microphone and RJ45
YAESU M-70 (ex. MD-100 A8X) desktop microphone for Yaesu HF equipment with 8-pin microphone plug or RJ45 with the 8-pin > RJ45 adapter included.8 pins and RJ45 connector (included) Supply
149,00 € tax incl.In stock124,17 €tax excl.
-
Yaesu MH-31B8 handheld microphone with 8 pins
Yaesu MH-31B8 handheld microphone with 8-pin connector for Yaesu FTDX-9000 FTDX-5000 FTDX-3000 and FTDX-1200 sets. Also compatible with :FT-767DXFT-747GX
43,00 € tax incl.In stock35,83 €tax excl.
-
Signalink SLCAB-8PD Mini-DIN 8-pin DATA radio cable for Icom Ten-Tec
The Signalink SLCAB8PD radio interface cable can be used with the Signalink USB sound card and with practically all ICOM, Ten-Tec radios which have an 8-pin mini-DIN data port (DATA socket). This
34,90 € tax incl.In stock29,08 €tax excl.
-
Jumper Signalink SLMOD-8PD for Icom Mini DIN Data 8-pin
The Signalink SLMOD8PD Jumper module is compatible for use with the Signalink USB sound card and with virtually all ICOM radios which have an 8-pin mini-DIN data port (DATA socket). This module is
12,90 € tax incl.In stock10,75 €tax excl.
-
Signalink SLCAB-8R micro 8-pin radio cord Alinco Elecraft Icom Kenwood Yaesu
The Signalink SLCAB8R radio interface cable can be used with the Signalink USB sound card and with virtually all Alinco, Elecraft, ICOM, Kenwood and Yaesu radios that have an 8-pin micro plug . This
34,90 € tax incl.In stock29,08 €tax excl.
Jumper Signalink SLMOD-8RK 8 pin microphone socket for Kenwood and Alinco
This jumper module is compatible with virtually all Kenwood and Alinco radios that use an 8 pin round type mic jack. This includes but is not limited to the radios listed below. The radio cable
12,90 € tax incl.In stock10,75 €tax excl.
Jumper Signalink SLMOD-8RY for 8-pin microphone socket for Yaesu
This jumper module is compatible with virtually all Yaesu radios that use an 8 pin round type mic jack. This includes but is not limited to the radios listed below. The radio cable compatible with
12,90 € tax incl.In stock10,75 €tax excl.
Signalink SLCAB-8PM Mini-DIN 8-pin DATA radio cable for Xiegu
The Signalink SLCAB8PM radio interface cable can be used with the Signalink USB sound card and with practically all Xiegu radios which have an 8-pin mini-DIN data port (DATA socket). This includes,
34,90 € tax incl.In stock29,08 €tax excl.
Delivery Europe & Overseas
Stock and shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal
Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.