Viewed products
The SLMOD578 Signalink Jumper module is...
The SLMOD578 Signalink Jumper module is compatible for use with the Signalink USB sound card in Anytone AT-D578UV and Alinco DR-MD520 radios.
The radio cable compatible with this module is part number: SLCABRJ4.
Supplied with: 1 Signalink Jumper module SLMOD-578.
Anytone
AT-D578UV V1
AT-D578UV V2
Alinco
DR-MD520
Important notes on configuring the radio
1 - The radio must have "level detection" activated or the PTT will not work. This function must be activated in the radio's programming software or in the radio's menu system. In the programming software, go to Optional Setting, the Other tab, and change HandOpMode to "Level Detect". On the radio's front panel, go to Menu, Settings, Radio Set, Other Func, Hand Type, and select "Volt-Det".
2 - The microphone socket on this radio uses differential audio which CANNOT be used with the SignaLink or the radio's audio amplifier will be damaged. Instead, you will need to attach the audio cable supplied between the SignaLink's SPKR socket and one of the radio's external speaker sockets (one socket disconnects the radio's built-in speaker, the other does not - see your radio's manual for details).
Reference: ANYTONE-OREILLETTE-BLUETOOTH-956
This Bluetooth micro-headset for the Anytone AT-D878UV* handheld or the mobile AT-578UV*, allows you to receive and make calls in hands-free mode, it integrates PTT button and can operate in addition
Reference: ANYTONE-BOUTON-PTT-957
Bluetooth PTT button for Anytone AT-878UV equiped with BT option.Delivered with: 1 PTT button, 1 velcro strap and 1 micro-USB cable.
Reference: ANYTONE-MICRO-D578-980
Original hand microphone for the DMR Anytone AT-D578UV mobile.Comes with: Micro Anytone original warranty.
Reference: SIGNALINK-CABLE-SLCAB8R-1493
The Signalink SLCAB8R radio interface cable can be used with the Signalink USB sound card and with virtually all Alinco, Elecraft, ICOM, Kenwood and Yaesu radios that have an 8-pin micro plug . This
Click here to leave a review
Be the first to ask a question about this product!
This Bluetooth micro-headset for the Anytone AT-D878UV* handheld or the mobile AT-578UV*, allows you to receive and make calls in hands-free mode, it integrates PTT button and can operate in addition
12,92 €tax excl.
Bluetooth PTT button for Anytone AT-878UV equiped with BT option.Delivered with: 1 PTT button, 1 velcro strap and 1 micro-USB cable.
10,42 €tax excl.
Original hand microphone for the DMR Anytone AT-D578UV mobile.Comes with: Micro Anytone original warranty.
19,92 €tax excl.
The new version of Anytone AT-D578UV PLUS V2 mobile radio features VFO mode, APRS in FM and DMR, with GPS and Bluetooth. The V2 now offers APRS RX as well as the VHF AM aviation band from 118 to 136
365,83 €tax excl.
The Signalink USB radio interface from Tigertronics is a USB sound card that allows you to receive and transmit from a computer to practice digital modes such as SSTV, RTTY, Packet, PSK, ROS, FT8,
120,83 €tax excl.
The Signalink SLCAB8R radio interface cable can be used with the Signalink USB sound card and with virtually all Alinco, Elecraft, ICOM, Kenwood and Yaesu radios that have an 8-pin micro plug . This
29,08 €tax excl.
The Signalink SLCABRJ4 radio interface cable can be used with the Signalink USB sound card and with practically all Alinco , ICOM, Kenwood, Yaesu radios and Anytone AT-578UV (V1 et V2). This radio
29,08 €tax excl.
This jumper module is compatible with virtually all Kenwood and Alinco radios that use an 8 pin round type mic jack. This includes but is not limited to the radios listed below. The radio cable
10,75 €tax excl.
The Signalink SLUSB-8R interface pack with the SLMOD8RK module is compatible with Kenwood & Alinco radios equipped with an 8-pin micro such as: TS-450, TS-680, TS-690, TS-780, TS-790, TS-850,
157,50 €tax excl.
Handheld microphone for Bluetooth remote control of the Anytone AT-D578UV (V1) and AT-D578UV (V2).Channel/Frequency selection Zone selection Volume control Programmable button P1-P3 Includes
111,75 €tax excl.
149,00 € -10%The new Q9 is a mono Bluetooth headset with PTT button and is compatible with the AT-D878 and AT-D578, which have built-in Bluetooth*.Operating time: approx. 30 hours Standby time: approx. 85 hours
57,50 €tax excl.
This card adds Bluetooth functions and APRS reception and transmission, in analogue and digital mode, to the AnyTone AT-D578UV V1 or V2 mobile phone. Please note that this module is difficult to
49,17 €tax excl.
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.