No products
New products
-
WRTH Handbook 2025 - Directory of radio & TV stations worldwide
49,76 € tax excl. -
KrakenSDR : SDR Receiver for Direction Finding with 5x Gonio Antennas
989,00 € tax excl. -
USB 2.0 isolator USB galvanic protection and 400mA ground loops
59,00 € tax excl. -
Viewed products
-
Jumper Signalink...
The Signalink SLMOD13K Jumper module is...
-
CHAMELEON 40/20 FD HF Fan Dipole 40m and 20m portable antenna without tuner
139,30 € -30% 199,00 €
Jumper Signalink SLMOD-13K for Kenwood Mini DIN Data 13-pin
No review at the momentThe Signalink SLMOD13K Jumper module is compatible for use with the Signalink USB sound card and with virtually all Kenwood radios that have a 13-pin mini-DIN data port (DATA socket). This includes, but is not limited to, the radios listed below.
The radio cable compatible with this jumper module (jumper) bears the reference: SLUSB13K .
In case of doubt, you can check using the guide to download in PDF below, the correct reference of radio cable and jumper module (jumper) for your set.
Supplied with: 1 Signalink SLMOD-13K Jumper module.
Download
Guide in French to choose the right radio cable and jumper according to the brand and model of the radio used. 177.6k
Guide in English to choose the right radio cable and jumper according to the brand and model of the radio used. 666.13k
Data sheet
Compatible Kenwood transceiver :
TS-690
TS-850
TS-870
TS-940
TS-950
TS-990
TS-2000
TS-2000X
TS-140S
TS-440
TS-440SAT
TS-450
TS-570
TS-570D
TS-570DG
TS-570S
TS-570SG
TS-590S
TS-590SG
For the settings below, please refer to the picture below:
Setting # 1 - This setup is the most common and works with early Kenwood radios such as the TS-140, TS-450S, TS-850, TS-870 and TS-950. Some newer radios such as TS-570D, TS-590S, TS-990 and TS-2000 / X also use this setting.
Setting # 2 - This configuration is less common and is used by some recent radios (TS-690 for example), and some older radios like the TS-440.
Setting # 3 - This configuration works only with TS-940.
Customers also bought
34,90 €Reference: SIGNALINK-CABLE-SLCAB13K-1489
Signalink SLCAB-13K Mini-DIN 13-pin DATA radio cable for Kenwood
The Signalink SLCAB13K radio interface cable can be used with the Signalink USB sound card and with almost all Kenwood radios which have a 13-pin mini-DIN data port (DATA socket). This includes, but
34,90 €
7,90 €Reference: CABLE-RG58-BNC-UHF-50CM-1117
RG58 coaxial cable extension with BNC Male and UHF Male (PL-259)
Coaxial patch cable with BNC Male - UHF Male connector (PL-259) with RG58 MIL-C-17 50 ohm coaxial cable for use in frequencies from 0 to 1000Mhz. Available in different lengths: 50cm, 1m or 2 metres.
7,90 €
2,50 €Reference: NAGOYA-UHFPU213-PL259-11MM-375
PL-259 connector 11mm (UHF male)
PL259 long socket connector (UHF male) for coaxial cable 11mm weld.
2,50 €
3,90 €Reference: KOM-PL-259-6-TG-1201
PL male 6mm for coaxial RG-58
PL male 6mm, teflon, for RG-58 coax, with gold plated center connector.For 5 or 6mm coaxial cable.
3,90 €
We also recommend
145,00 €Reference: TIGER-SIGNALINK-BOITIER-1455
Signalink USB from Tigertronics Radio interface & sound card for digital modes
The Signalink USB radio interface from Tigertronics is a USB sound card that allows you to receive and transmit from a computer to practice digital modes such as SSTV, RTTY, Packet, PSK, ROS, FT8,
145,00 €
189,00 €Reference: SIGNALINK-PACK-SLUSB6PM-1484
Signalink SLUSB-6PM pack for ICOM YAESU Kenwood 6-pin mini-din DATA socket
The Signalink SLUSB-6PM V2 interface pack is compatible with virtually all ICOM, Kenwood and Yaesu radios equipped with a 6-pin mini-DIN data port (DATA socket) such as: IC-706MKIIG, IC-9100, IC
189,00 €
34,90 €Reference: SIGNALINK-CABLE-SLCAB13I-1487
Signalink SLCAB-13I Mini-DIN 13-pin DATA radio cable for Icom
The Signalink SLCAB13I radio interface cable can be used with the Signalink USB sound card and with practically all ICOM radios which have a 13-pin mini-DIN data port (DATA socket). This includes, but
34,90 €
12,90 €Reference: SIGNALINK-JUMPER-SLMOD13I-1488
Jumper Signalink SLMOD-13I for Icom Mini DIN Data 13-pin
The Signalink SLMOD13I Jumper module is compatible for use with the Signalink USB sound card and with virtually all ICOM radios that have a 13-pin mini-DIN data port (DATA socket) IC-78, IC-703,
12,90 €
Reviews
Additional or similar equipment
-
Signalink USB from Tigertronics Radio interface & sound card for digital modes
The Signalink USB radio interface from Tigertronics is a USB sound card that allows you to receive and transmit from a computer to practice digital modes such as SSTV, RTTY, Packet, PSK, ROS, FT8,
145,00 € tax incl.In stock120,83 €tax excl.
-
Signalink SLUSB-6PM pack for ICOM YAESU Kenwood 6-pin mini-din DATA socket
The Signalink SLUSB-6PM V2 interface pack is compatible with virtually all ICOM, Kenwood and Yaesu radios equipped with a 6-pin mini-DIN data port (DATA socket) such as: IC-706MKIIG, IC-9100, IC
189,00 € tax incl.Out of stock, available within 1-2 months157,50 €tax excl.
-
Signalink SLCAB-13I Mini-DIN 13-pin DATA radio cable for Icom
The Signalink SLCAB13I radio interface cable can be used with the Signalink USB sound card and with practically all ICOM radios which have a 13-pin mini-DIN data port (DATA socket). This includes, but
34,90 € tax incl.In stock29,08 €tax excl.
-
Jumper Signalink SLMOD-13I for Icom Mini DIN Data 13-pin
The Signalink SLMOD13I Jumper module is compatible for use with the Signalink USB sound card and with virtually all ICOM radios that have a 13-pin mini-DIN data port (DATA socket) IC-78, IC-703,
12,90 € tax incl.In stock10,75 €tax excl.
-
Signalink SLCAB-13K Mini-DIN 13-pin DATA radio cable for Kenwood
The Signalink SLCAB13K radio interface cable can be used with the Signalink USB sound card and with almost all Kenwood radios which have a 13-pin mini-DIN data port (DATA socket). This includes, but
34,90 € tax incl.In stock29,08 €tax excl.
Signalink-SLUSB-13K pack for Kenwood with 13-pin mini-din DATA socket
The Signalink- SLUSB-13K interface pack is compatible with virtually all Kenwood radios equipped with a 13-pin mini-DIN data port such as: Kenwood TS-950, TS-990, TS-2000, TS-2000X, TS-140S, TS-440,
189,00 € tax incl.Out of stock, available within 1-2 months157,50 €tax excl.
Signalink-SLUSB-HTW pack for walkie talkie 2-pin micro plug Kenwwod Baofeng Woux
The Signalink-SLUSB-HTW interface pack is compatible with Kenwood, Wouxun and Baofeng radios equipped with a 2-pin micro plug such as: Baofeng UV-5R, UV-6R, UV-82, Kenwood TH-F7, TH-D72, TH-K2A,
189,00 € tax incl.Out of stock, available within 1-2 months157,50 €tax excl.
Signalink-SLUSB-8R + SLMOD-8RK module pack for Kenwood & Alinco with 8-pin mic j
The Signalink SLUSB-8R interface pack with the SLMOD8RK module is compatible with Kenwood & Alinco radios equipped with an 8-pin micro such as: TS-450, TS-680, TS-690, TS-780, TS-790, TS-850,
189,00 € tax incl.Out of stock, available within 1-2 months157,50 €tax excl.
Delivery Europe & Overseas
Stock and shipped from France
Product return
14 days to return, 2 warranty
Email support
Response within 24h to 72h
Secure payment
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.