Moonraker GPA-80F multiband HF vertical antenna + 6m fiberglass antenna View larger

MOONRAKER

MOONRAKER-GPA-80-F-2412

New product

United Kingdom

Moonraker GPA-80F multiband HF vertical antenna + 6m fiberglass antenna

rating Read the review
Average rating: 5/5 Number of reviews: 1

Moonraker GPA-80F basic HF fiberglass antenna for fixed use in the amateur radio bands from 3.5 to 57 MHz (80 Meters to 6 Meters) for TX transmission (with the use of an external tuner) and for reception in RX frequencies from 2 Mhz to 90 MHz.

The antenna is approximately 5.5 meters high and can handle a maximum power of 400 watts.

The connector at the base of the antenna is UHF-Female (SO-239), supplied with a bracket for mounting on 25 to 42mm mast.

Available in aluminum version: GPA-80HF

Supplied with: 1 Moonraker GPA-80 F HF fiberglass antenna

Delivery info: This antenna is considered a very large parcel, and carriers apply an additional surcharge for shipping.

More details

169,00 € tax excl.

In stock

   More than 10 Items

Download

Data sheet

  • Antenna type: HF Vertical omnidirectional
  • TX frequency: 80M to 6M (3.5-57MHz) with an external tuner
  • RX frequency: 2.0 to 90 MHz
  • Maximum power: 400 Watts
  • SWR: Less than 1.5: 1 on all bands (with tuner)
  • Impedance: 50 Ohms
  • Antenna connection: UHF-Female (SO-239)
  • Length: 5.5 meters approximatly
  • Gglass vibrator whisk
  • Mounting pole diameter: 25-42 mm
  • Weight: 1.9Kg
  • Wind resistance: 120km/h

Depending on the installation and the ground plan, the antenna can be used directly on the 40m to 10m bands, on the 60m and 80m bands an external tuner is required in all cases.

The addition of radians in the form of electric wires, at the base of the whip, is recommended to improve the performance of the antenna, in particular on the low HF bands.

Assembly advice: On the version with aluminum whip, insert each 10 cm aluminum tube into the previous tube, screw without forcing the clamps, put the cap at the top of the antenna on the last tube. Check the tightness of the screws at the base of the whip.

On the fiberglass version the tubes are screwed directly into each other. Check the tightness of the screws at the base of the whip, re-screw if necessary without forcing.

Reviews

Click here to leave a review

rating 5
longueur incorrecte
Bjr, antenne mentionnée comme faisant 5.50m sur sa fiche article, et 6.50m quand on vous demande la taille par mail, 1m offert ou imprécision ?

Additional or similar equipment


Delivery Europe & Overseas

Stock and shipped from France

Product return

14 days to return, 2 warranty

Email support

Response within 24h to 72h

Secure payment

SSL, VISA, Mastercard, Paypal

Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.