> Ham & radio equipment>HF Transceiver>HF ICOM Accessories>mAT-M200 : Automatic HF antenna tuner 1.8-54 MHz 200W for ICOM & Kenwood
New mAT-M200 : Automatic HF antenna tuner 1.8-54 MHz 200W for ICOM & Kenwood View larger

MAT-TUNER

New product

China

mAT-M200 : Automatic HF antenna tuner 1.8-54 MHz 200W for ICOM & Kenwood

rating No review at the moment

The mAT-M200 is an automatic antenna tuner, external and compatible with ICOM brand HF transceivers that supports the original AH-3 or AH-4 Icom tuner and Kenwood HF sets supporting the AT-250 or AT-300, with RF power not exceeding 200W in SSB mode.

  • Maximum RF power: 200 watts in SSB mode, 100 watts in digital mode (FT8, CW, RTTY)
  • Frequencies: 1.8 to 54 MHz
  • Number of memories: 16,000
  • Impedance (Ω): 5-1500
  • Connection: mAT-CY (Kenwood) or mAT-CI (ICOM) control cable
  • Power source: Powered by the transmitter via the control cable
  • Compatible antenna types: Dipole, vertical, Yagis, or any coax-fed antenna
  • Tuning time: 0.1 - 5 seconds tuning time (fully tuned)
  • Power consumption: 500 mA
  • Dimensions: 20 x 13 x 4 cm
  • Weight: 0.8 kg

This tuner is suitable for use in FT8, CW and RTTY modes, with RF power up to 100 watts maximum in these modes.

Choose the cable included for ICOM or Kenwood when you add it to your shopping basket.

Supplied with: 1 mAT-M200 tuner, 1 MAT-CI control cable for ICOM or MAT-CK for Kenwood, user manual.

More details

299,48 € tax excl.

Out of stock, available in 7-10 days

  • Cable ICOM mAT-CI
  • Cable Kenwood mAT-CK

Download

Manual Tuner M200 (FR)

606.01k

Manual Tuner M200 (EN)

498.7k

Data sheet

Compatible ICOM HF radios with 4-pin tuner connector: IC-706, IC-703, IC-718, IC-7000, IC-7100, IC-7200, IC-7300, IC-7400, IC-7410, IC-746, IC-756, IC-7600, IC7610

Compatible Kenwood HF sets with 6-pin tuner connector: TRC-80, TK-80, TS-2000, TS-50, TS-450, TS-480 SAT, TS-570, TS-590, TS-850, TS-870, TS-890, TS-990

The transmitter powers the tuner via the mAT-CI (ICOM) or mAT-CK (Kenwood) cable, which communicates with the tuner and controls the operation of the tuner box. The tuner does not require an additional power supply. The tuner is compatible with ICOM and KENWOOD tuners, and users can easily control the tuner using the [TUNE] or [AT] buttons on the radio equipment panel.

For ICOM transceivers, this tuner will only work with transmitters that have a 4-pin tuner socket. If your transmitter does not have this socket, you will not be able to use it.

The same applies to KENWOOD transmitters, but their TUNER socket is 6-pin. When the tuner is switched on and started, it detects whether it is currently connected to an ICOM device or a KENWOOD device and matches it automatically.

  • Customers also bought

    • UHF Male connector (PL-259) for 10.3mm AIRBORNE HYPERFLEX RG213 cable
      7,90 €

      Reference: MESSI-CO-UHF-10M-S-EVO-1139

      UHF Male connector (PL-259) for 10.3mm AIRBORNE HYPERFLEX RG213 cable

      UHF Male connector (PL-259) to soldering, Messi & Paoloni for 10.3mm coaxial cable M&P AIRBORNE 10, HYPERFLEX 10, ULTRAFLEX 10 and RG213 PLUS.New design with double seal to ensure perfect

      7,90 €
    • Coaxial cable RG-213 PLUS M&P 10.3mm en bobine
      86,70 €

      Reference: MESSI-COAXIAL-RG213M-AR30-1150

      Coaxial cable RG-213 PLUS M&P 10.3mm en bobine

      Coaxial cable RG-213 PLUS Messi & Paoloni, RG213U MIL C17 with a diameter of 10.3 mm, for use in frequencies from 0 to 8000 Mhz (HF, VHF, UHF and SHF) or for the construction of wire antenna,

      86,70 €
    • 6m extension kit for ProSisTel vertical antennas
      78,44 €

      Reference: PST-KITESP6M-2828

      6m extension kit for ProSisTel V dipole antenna

      This extension kit adds the 6m (50 MHz) band to the following PROSISTEL basic antenna models: PST-152TV, PST-1524TV and PST-24TV.

      78,44 €
    • Special scissor coaxial cable scissors
      19,90 €

      Reference: MESSI-CISEAU-FORB1-1161

      Special scissor for coaxial cable from 5mm to 13mm

      This Scissor ensures precision and delicacy when cutting a coaxial cable and facilitates the insertion of the RF connector. For coaxial cable 5mm to 13mm.With insulated handle, a straight chrome

      19,90 €

  • We also recommend

Reviews

Click here to leave a review

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Additional or similar equipment

Delivery Europe & Overseas

Stock and shipped from France

Product return

14 days to return, 2 warranty

Email support

Response within 24h to 72h

Secure payment

SSL, VISA, Mastercard, Paypal

Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.