Reference: XIEGU-XPA125B-545
The Xiegu XPA125-B (new version) is a 100-125W amplifier for frequencies from 0.5 to 30Mhz and 50 to 54Mhz, with an integrated antenna tuner (1.8 to 30Mhz). It is equipped with protections:
Reference: YAESU-G-1000DXC-1431
Yaesu G-1000DXC rotor for medium / heavy duty, DXC version with interface card for radio connection, equipped with preset and rotational speed adjustment. 1-year warranty.
480,83 €
Reference: SPIDERBEAM-MF18-SET1-18M-2163
The Spiderbeam Heavy Duty 18m fibreglass mast is a good choice for using a wide variety of 40/80/160m long-wire and GP or inverted L antennas, lightweight 1-element Quad or Delta loops for 20-10m, as
Reference: INRAD-W1-2832
The INRAD W1 headset is a high quality, wide and comfortable headset that allows the ears to enter the padding, avoiding the pain of the ear pressed against the head. It features thick rubberised foam
Reference: YAESU-ATAS-25-1291
Yaesu ATAS-25 portable antenna with manual synchronization from 7Mhz to 430Mhz, compatible with Yaesu FT-818ND, FT-891, FT-991A radios. Designed to be mounted on a standard camera tripod (1/4 "stud),
205,83 €
Reference: SPIDERBEAM-MF14-SET1-14M-2746
The Spiderbeam Robust (Heavy Duty) 14m fibreglass telescopic mast is a great choice for using a wide variety of 40/80/160m long-wire and GP or inverted L antennas, lightweight 1-element Quad or Delta
165,83 €
Reference: SIGNALINK-PACK-SLUSB13K-1518
The Signalink- SLUSB-13K interface pack is compatible with virtually all Kenwood radios equipped with a 13-pin mini-DIN data port such as: Kenwood TS-950, TS-990, TS-2000, TS-2000X, TS-140S, TS-440,
Reference: SIGNALINK-PACK-SLUSB8RI-1708
The Signalink SLUSB-8R + SLMOD-8RI interface pack is compatible with ICOM radios equipped with an 8-pin micro such as ICOM : IC-707/718/720/725/726, IC-728/729/730/735, IC-736/737/738/740/745,
Reference: SIGNALINK-PACK-SLUSB8R2-1707
The Signalink SLUSB-8R + SLMOD-8RY interface pack is compatible with YAESU radios equipped with an 8-pin micro such as: FT-747, FT-757, FT-840, FT-847, FT-890, FT-920, FT-950, FT-980, FT-990,
Reference: SIGNALINK-PACK-SLUSB8RK-1567
The Signalink SLUSB-8R interface pack with the SLMOD8RK module is compatible with Kenwood & Alinco radios equipped with an 8-pin micro such as: TS-450, TS-680, TS-690, TS-780, TS-790, TS-850,
Reference: SIGNALINK-PACK-SLUSBKX3-1519
The Signalink-SLUSB-KX3 interface pack is compatible with Elecraft radios equipped with a 3.5mm microphone jack like the Elecraft KX2, KX3. Low noise USB sound card Quick and easy installation with
Reference: SIGNALINK-PACK-SLUSB13I-1517
The Signalink-13I interface pack is compatible with ICOM radios equipped with a 13-pin mini-DIN data port (DATA socket) such as: ICOM IC706, IC-706MKII, IC-706MKIIG, IC-718, IC -7410 (list below).
Reference: SIGNALINK-PACK-SLUSB8PD-1516
The Signalink-SLUSB-8PD interface pack is compatible with practically all ICOM and Ten-Tec radios equipped with an 8-pin mini-DIN data port (DATA socket) such as: ICOM IC-756, IC-7600 , IC-7610,
Reference: SIGNALINK-PACK-SLUSB8PM-1514
The Signalink-SLUSB-8PM interface pack is compatible with Xiegu radios equipped with an 8-pin mini-DIN data port (DATA socket): G-90, X-5105Low noise USB sound card Quick and easy installation with
Reference: SIGNALINK-PACK-SLUSB6PM-1484
The Signalink SLUSB-6PM V2 interface pack is compatible with virtually all ICOM, Kenwood and Yaesu radios equipped with a 6-pin mini-DIN data port (DATA socket) such as: IC-706MKIIG, IC-9100, IC
Reference: SIGNALINK-PACK-SLUSBHTW-1520
The Signalink-SLUSB-HTW interface pack is compatible with Kenwood, Wouxun and Baofeng radios equipped with a 2-pin micro plug such as: Baofeng UV-5R, UV-6R, UV-82, Kenwood TH-F7, TH-D72, TH-K2A,
Reference: SIGNALINK-PACK-SLUSB5PD-1515
The Signalink-SLUSB-5PD interface pack is compatible with Yaesu and Ten-Tec radios equipped with a 5-pin mini-DIN data port (DATA socket) such as: Yaesu FT1000, FT2000, FTDX5000, FTDX9000 (list
Reference: WIND-ARK-705-2388
ARK-705 Shield is a three-dimensional protective shield designed for ICOM IC-705 portable transceiver. It is made of aluminum alloy by CNC machine tool, which can completely wrap the radio body,
Reference: NISSEI-NS-30SD-713
Compact switch mode power supply with digital display NISSEI NS-30SD, 13.8 V (or adjustable from 9 to 15 volts), 30 A Max. with cigarette lighter socket (max. 10A) and 3A terminal block connector on
Reference: MICRO-YAESU-MICRO-M70-1009
YAESU M-70 (ex. MD-100 A8X) desktop microphone for Yaesu HF equipment with 8-pin microphone plug or RJ45 with the 8-pin > RJ45 adapter included.8 pins and RJ45 connector (included) Supply
Reference: YAESU-CAT-SCU17-1085
The Yaesu SCU-17 interface is a CAT control system that allows you to control a Yaesu transceiver from a computer and to be able to practice digital communication modes, also called digimodes such as
Reference: TIGER-SIGNALINK-BOITIER-1455
The Signalink USB radio interface from Tigertronics is a USB sound card that allows you to receive and transmit from a computer to practice digital modes such as SSTV, RTTY, Packet, PSK, ROS, FT8,
120,83 €
Reference: SPIDERBEAM-MF120000-12M-1871
The Spiderbeam Heavy Duty 12m fibreglass mast is the right choice for using a wide variety of 40/80/160m long wire and GP or inverted L antennas, lightweight 1-element Quad or Delta loops for 20-10m,
Reference: MOONRAKER-WHIZZ-LOOP-V3-ATU-1271
New model of the famous Moonraker Whizz Loop V3 ATU antenna, compared to the V2 this version now covers from 7 to 50 Mhz in reception/transmission instead of 7 to 30 Mhz.The Whizz Loop is ideal for
90,83 €
Reference: DIAMOND-SX100-220
SWRmeter and wattmeter Diamond SX100, measures the reflected power and VSWR on the HF bands from 1.6 to 60 Mhz and for powers of 30/300/3KW maximum.Frequency: 1.6 to 60MhzPower ranges: 30/300/3000
Reference: XIEGU-BATT-X6100-2416
Original replacement battery for the XIEGU X6100 transceiver. Includes 2x 3.7V 3000mAh cells and electronic charge management board. Supplied with: 1 official XIEGU battery for X6100.
Reference: SPIDERBEAM-MM10000-10M-1870
The Spiderbeam 10m Telescopic Pole is the ideal solution for users looking for a lightweight, easy to carry pole that can be set up quickly and easily. Compact and easy to store in any large suitcase
70,83 €
Reference: MOONRAKER-WHIZZ-LOOP-ATU-1270
Moonraker Whizz Loop antenna with manual tuner (ATU) from 14Mhz to 50Mhz. This antenna can be used for QRP, SOTA or portable modes. ATU for HF TX: 14 to 50 MHz Power: 10 Watt Max. AM / CW / SSB
Reference: DIGIRIG-DRMOB-2946
Digirig is an integrated USB interface for digital amateur radio modes (FT8, SSTV, RTTY, CW, VARA, etc.) combining an audio codec, a CAT serial interface and PTT control. All you need is a simple USB
Reference: XIEGU-CARTE-DE-19-1887
The Xiegu CE-19 extension port makes it easy to connect a PC or other terminals and modems to use the digital modes SSTV, RTTY, ROS, PSK31, FT8, FT4, etc.The card allows you to extend the MINI-DIN8
55,83 €
Reference: SPIDERBEAM-MM07000-7M-1869
This 7m telescopic pole from Spiderbeam is a lightweight pole that is easy to carry and can be set up quickly. Although compact and easy to store in any large suitcase (71cm folded), this telescopic
57,50 €
Reference: LIVRE-GUIDE-WRTH-1123
The World Radio TV Handbook WRTH 2025 (79th edition) is the world's most accurate and comprehensive directory of AM, FM, Digital Radio (DAB/HD) and national TV stations. With 800 pages, it has been a
49,76 €
Reference: XIEGU-BATT-X6200-B-2862
Original X62B 3200mAh battery and 7.6V replacement battery for the XIEGU X6200 transceiver. Supplied with: 1 official XIEGU battery for X6200.
Reference: RFKONNECT-USB-ISOL-2958
RF-KONNECT's USB isolator isolates a USB device from the host computer (PC), ideal for amateur radio stations connected by USB to a computer to reduce noise and interference from a computer.
Reference: XIEGU-G90H1-1627
G90-H1 retractable stand for Xiegu G90, compact size to save your space, ideal for use in the car or on the desk.Fitted and stable with 7 pads to increase friction and a metal loop to secure the radio
Reference: DIGIRIG-DRLITE-2948
Digirig Lite Rev 1.2 is the minimalist version of Digirig Mobile with the same audio codec but without the serial port.Combines audio codec and PTT switch Supports PTT through the GPIO3 of the CM108
Reference: DIGIRIG-ELEK3MOBILE-2947
Elecraft K3 cables for Digirig Mobile 1.6+.Double coiled cables serial cable for CAT with DB9 plus audio cable divided into three for LINE-OUT (3.5mm TRS green), LINE-IN (3.5mm TRS red) and PTT IN
31,58 €
Reference: DIGIRIG-G16KENW-SP-2964
Digirig Mobile 1.6+ cables for Kenwood, Alinco and other transceivers using the standard 8-pin GX16 microphone connector with earthed centre pin or 3.5mm TRS jack.Provides audio input, audio output
31,58 €
Reference: DIGIRIG-FT8XXMOBILE-2954
Separate MiniDin6 (1200 baud audio + PTT) and MiniDin8 (CAT control) coiled cables. Compatible with : Alinco DR-735E, DR-735T ICOM IC-207, IC-207H, IC-208H, IC-2720H, IC-2800, IC-2820, IC-7000,
31,58 €
Reference: DIGIRIG-TS450MOBILE-2938
Digirig Mobile 1.6+ cables for Kenwood transceivers using 13-pin and 6-pin DIN connectors.coiled cable keeps things tidy by avoiding knots and kinks RS-232 serial cable for CAT with Din-6 connector
31,58 €
Reference: DIGIRIG-ELEKXCOMBO-2944
Elecraft KX2/KX3 cables for Digirig Mobile 1.6+two coiled cables or a minimalist combination cable to keep things tidy serial cable for CAT with 3.5mm TRS connector (black) and an audio cable
31,58 €
Reference: DIGIRIG-TS480MOBILE-2939
Digirig Mobile 1.6+ cables for Kenwood transceivers using MiniDin6 and DB9 connectors such as the TS-480.coiled cable keeps things tidy by avoiding knots and kinks an RS-232 serial cable for CAT
31,58 €
Reference: DIGIRIG-KWOODMOBILE-2937
Digirig Mobile 1.6+ cables for Kenwood transceivers using 13 pin Din and DB9 connectors.The coiled cable keeps things tidy by avoiding knots and kinks. an RS-232 serial cable for CAT with DB9
31,58 €
Reference: DIGIRIG-G90MOBILE-2933
Complete set of Digirig Mobile transceiver cables for Xiegu radios.Cables work for Xiegu G90, Xiegu X5105 and Xiegu G106 one CAT serial cable (3.5mm TRS) and one Audio+PTT cable (Mini Din-8) coiled
31,58 €
Reference: XIEGU-G90S1-1626
G90-S1 stand for Xiegu G90 transceiver. The foldable metal feet of the stand help you achieve a comfortable viewing angle. Supplied with: 1 G90-S1 stand
29,08 €
Reference: WIND-RC2-2390
The RC-2 is a compact antenna support designed for ICOM IC-705 QRP portable transceiver. It is made of aluminum alloy by CNC machine tools, and can be easily connected to small GP antennas (such as
Reference: YAESU-CORD-M70-S8100535-2273
Replacement lead for Yaesu M-70 table microphone with 8-pin connector and RJ45. Also compatible with MD-100A8X / MD-200 and MH-31B8J handheld microphone.
Reference: XIEGU-CARTE-CE-19-1014
The Xiegu CE-19 extension port makes it easy to connect a PC or other terminals and modems to use the digital modes SSTV, RTTY, ROS, PSK31, FT8, FT4, etc.The card allows you to extend the MINI-DIN8
Reference: XIEGU-L4001-1624
The L4001 cable allows the XPA125B power amplifier to be connected to the X6100 or X6200 and extends its output power to 100W.After connection, the X6100 can automatically control the band switching
21,58 €
Reference: DIGIRIG-GX16KENW-2956
Digirig Mobile 1.6+ cables for Kenwood, Alinco and other transceivers using the standard 8-pin GX16 microphone connector with earthed centre pin.Coiled cables keep things tidy by avoiding knots and
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.