Viewed products
Big Wheel WA5 PCB GSM antenna for 900-930MHz...
-50%
View larger
Big Wheel WA5 PCB GSM antenna for 900-930MHz with a gain of 2dBi. The antenna is delivered without connector (coaxial cable or SMA to weld on the PCB).
Frequencies: 900-930 MHz
Type: Big Wheel
Gain: 2dBi
Impedance: 50 ohms
Amateur radio design: WA5VJB
Dimensions: 110mm diameter
Weight: 26 grams
Reference: PIGTAIL-SMA-M-N-F-79
SMA Male to N Female pigtail adapter. RG 316 50 ohm coaxial cable. Available in 15cm, 50cm or 1 metre lengths (choose below).
Reference: PIGTAIL-SMA-M-UHF-F-80
Adapter cable pigtail SMA Male to plug UHF Female. RG 316 50 ohm coaxial cable. Available in 3 lengths: 15, 50 and 100 cm.
Reference: RF-KONNECT-87T299-CALIBRA-727
This calibration kit can be used with any SMA connector device, such as the MiniVNA Tiny and PRO2 or NanoVNA and any VNA.The SMA calibration kit consists of a dummy load of 50 ohms, an open circuit
Reference: WA5-ANT-PATCH4-5800-783
Printed circuit antenna WA5VJB Quad Patch for 5.8Ghz with a gain of 12dBi. The antenna is delivered without connector (solder wire on the PCB).Frequencies: 5800 MHzType: PatchNumber of elements:
18,50 €
Reference: ANT-MINI-GSM-97
High-gain antenna (1.5dbi) with male SMA connector for GSM and multiband. Frequencies: 824 to 960MHz (EDGE, GPRS, GSM 850, GSM 900) and 1800 to 2170MHz (GSM 1900, UMTS/3G 1900/2100)Gain: 1.5dBi VSWR:
Reference: DIAMOND-SX1100-117
The SX1100 measures forward and reflected power and VSWR for 1.8-160Mhz, 430-450Mhz, 800-930Mhz and 1240-1300Mhz. Two directional couplers with switch and LED indicators for in-line connection of two
Reference: CABLE-COAXIAL-SMA-M-1M-302
SMA Male to SMA Male cable with KSR195 low-loss 50 ohm coaxial cable for use from 0 to 6Ghz. Available lengths: 0.5m (50cm), 1, 3 or 5 metresConnector 1: SMA MaleConnector 2: SMA Male
Reference: CABLE-COAXIAL-SMA-M-1M-4959
Low-loss 50 ohm coaxial cable KSR195 5mm, for use from 0 to 6Ghz and with an SMA Male connector at one end and without connector at the other end (bare end to be soldered or crimped). Length:
Click here to leave a review
Be the first to ask a question about this product!
High-gain antenna (1.5dbi) with male SMA connector for GSM and multiband. Frequencies: 824 to 960MHz (EDGE, GPRS, GSM 850, GSM 900) and 1800 to 2170MHz (GSM 1900, UMTS/3G 1900/2100)Gain: 1.5dBi VSWR:
5,75 €tax excl.
The SX1100 measures forward and reflected power and VSWR for 1.8-160Mhz, 430-450Mhz, 800-930Mhz and 1240-1300Mhz. Two directional couplers with switch and LED indicators for in-line connection of two
182,50 €tax excl.
SMA Male to SMA Male cable with KSR195 low-loss 50 ohm coaxial cable for use from 0 to 6Ghz. Available lengths: 0.5m (50cm), 1, 3 or 5 metresConnector 1: SMA MaleConnector 2: SMA Male
7,42 €tax excl.
Low-loss 50 ohm coaxial cable KSR195 5mm, for use from 0 to 6Ghz and with an SMA Male connector at one end and without connector at the other end (bare end to be soldered or crimped). Length:
7,42 €tax excl.
Big Wheel WA5 PCB antenna for 1290MHz with a gain of 2dBi. The antenna is delivered without connector (coaxial cable or SMA to weld on the PCB).Frequencies: 1290 MHzType: Big WheelGain: 2dBiImpedance:
9,54 €tax excl.
22,90 € -50%Big Wheel WA5 PCB antenna for 2425MHz with a gain of 2dBi. The antenna is delivered without connector (coaxial cable or SMA to weld on the PCB).Frequencies: 2425 MHzType: Big WheelGain: 2dBiImpedance:
5,38 €tax excl.
12,90 € -50%Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.