Diamond SS500 splitter/combiner for recieving from 0.5 to 500MHz, serves to connect 2 differents antennas to 1 receiver or 1 antenna to 2 receivers.
Impedance:50ohms
Weight:130g
Connector: SO-239
Isolation: More than 18dB (0.5 to 3MHz), more than 30dB (3 to 200MHz), more than 17dB (200 to 500MHz)
Isolation loss: Less than 0.6dB (0.5 to 3MHz), less than 0.8dB (3 to 200MHz), less than 1.0dB (200 to 500MHz)
Reference: CABLE-COAXIAL-SMA-M-UHF-1M-305
SMA Male to UHF Male coaxial cable with KSR195 low-loss 50 ohm coaxial cable for use from 0 to 6 GHz. Length: 1, 2, 5 or 10 metresConnector 1: SMA MaleConnector 2: UHF Male
Reference: PIGTAIL-SMA-M-UHF-M-77
SMA Male to UHF Male pigtail adapter. RG 316 coaxial cable 50 ohms, 15cm long.
Reference: KOM-EMBASE-BK-1500-539
This 15cm diameter magnetic base ensures a solid fixation and allows to screw a PL-259 antenna (UHF-male) on a car roof or a metal surface of minimum 1m².The magnetic base allows to support antennas
Reference: CABLE-RG58-BNC-UHF-50CM-1117
Coaxial patch cable with BNC Male - UHF Male connector (PL-259) with RG58 MIL-C-17 50 ohm coaxial cable for use in frequencies from 0 to 1000Mhz. Available in different lengths: 50cm, 1m or 2 metres.
Reference: DIAMOND-CMF2000-1122
The Diamond CMF-2000 is a common mode filter that will prevent TVI and EMI CEM interference, caused by the transmission coaxial cable.Usable from 1 to 54 Mhz all bands, HF amateur radio, CB 27 Mhz,
Reference: KOM-PWR-SW2M-1196
Commutateur switch d'antenne 2 positions avec connecteur SO-239 (UHF-femelle). Pour utilisation en fréquence de 0 à 1000 Mhz (1Ghz).
Reference: DIAMOND-CX210A-1742
Diamond CX-210A 2-position antenna switch with UHF female plug connector (SO-269), offering very low loss and high isolation, for frequency use from 0 to 1000 MHz (1 GHz). This rugged antenna switch
Reference: KOM-PWR-SW3M-1749
Komunica SW3M coaxial antenna switch, 3 positions with female UHF plug connector (SO-239). For use on frequencies from 0 to 800 Mhz. Delivered with: 1 SW3M antenna switch.
Click here to leave a review
Be the first to ask a question about this product!
The Diamond CMF-2000 is a common mode filter that will prevent TVI and EMI CEM interference, caused by the transmission coaxial cable.Usable from 1 to 54 Mhz all bands, HF amateur radio, CB 27 Mhz,
129,08 €tax excl.
Commutateur switch d'antenne 2 positions avec connecteur SO-239 (UHF-femelle). Pour utilisation en fréquence de 0 à 1000 Mhz (1Ghz).
45,83 €tax excl.
Diamond CX-210A 2-position antenna switch with UHF female plug connector (SO-269), offering very low loss and high isolation, for frequency use from 0 to 1000 MHz (1 GHz). This rugged antenna switch
42,08 €tax excl.
Komunica SW3M coaxial antenna switch, 3 positions with female UHF plug connector (SO-239). For use on frequencies from 0 to 800 Mhz. Delivered with: 1 SW3M antenna switch.
66,58 €tax excl.
Komunica SW4M 4 position coaxial antenna switch with UHF female connector (SO-239). For use in frequency from 0 to 900 Mhz. Delivered with: 1 SW4M antenna switch.
82,50 €tax excl.
13mm Black Ferrite Choke Balun for EMC Demagnetization Filter Anti-interference Device Clip-on VersionDescription:- It can filter high frequency noise, pulse interference from connection circuits.-
2,40 €tax excl.
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.