Accessories for CB 27 Mhz band and hardware.
Reference: NISSEI-NS28SW-716
Compact digital switching power supply NISSEI NS-28SW, 13.8V (or adjustable from 9 to 15 volts), 28A, with heavy-duty connection terminals on the rear panel.Protection against short circuits and
94,83 €
Reference: DIGIRIG-DRMOB-2946
Digirig is an integrated USB interface for digital amateur radio modes (FT8, SSTV, RTTY, CW, VARA, etc.) combining an audio codec, a CAT serial interface and PTT control. All you need is a simple USB
Reference: KOM-TRIPLE-MAG-1659
Komunica reinforced magnetic base with triple magnet. Super-robust version and maximum grip. Base connector type SO-239 + 5 m RG-58 connector type PL-259 Delivered with : Triple mag magnetic base, 1 x
Reference: PNI-MIKE65-2324
The Mike 65 Wireless Microphone, with its Bluetooth Dongle, are specially designed for the PNI Escort HP 6500, PNI Escort HP 6550 radio stations. This system is also compatible with all other stations
34,08 €
Reference: PNI-MIKE80-2677
Mike 80 wireless microphone and Bluetooth dongle specially designed for the PNI Escort HP 8001L and PNI Escort HP 9500 radio stations, as well as for any other 2-pin K connection (Kenwood) powered
34,08 €
Reference: MOON-15-023-TRIMAGSB-2268
Trimag-SB Moonraker, compact triple magnetic mount (SO239) with 3 magnets, each 95 mm in diameter. Supplied with SO-239 base and 4m coaxial cable with PL259.
Reference: PNI-AK-HP62-2323
The kit, which includes a 1500 mAh PNI PB-HP62 Li-Ion battery, a 230V power supply and a BNC antenna, lets you convert the PNI HP 62 radio station into a portable version, so you can take it with you
Reference: DIAMOND-MAT50-625
To use an HF antenna below 50Mhz band, a ground plane are required. This is not always possible or easy especially for antennas with magnetic base or for installations on a balcony. Diamond MAT-50
26,79 €
Reference: SIRIO-EMBASE-PM125PL-371
This 12.5cm diameter SIRIO magnetic base allows a PL-259 (UHF-male) antenna to be screwed to place on a car roof or any metal surface of at least 1m².The magnetic base can support large antennas over
Reference: DIAMOND-HP2-P810-821
Diamond P810 speaker with magnetic holder and volume control, noise filter, 12V power supply, 7.7cm speaker and 8 ohm, 6W maximum input power.Size: 113mm x 93mm x 43 mm.Delivered with: 1 Diamond P810
Reference: KOM-EMBASE-BK-1500-539
This 15cm diameter magnetic base ensures a solid fixation and allows to screw a PL-259 antenna (UHF-male) on a car roof or a metal surface of minimum 1m².The magnetic base allows to support antennas
21,58 €
Reference: KOM-EMBASE-MAG3-BM1PL-1001
Strong magnetic base mount of 12cm in diameter for screwing a PL-259 antenna (UHF-male) to land on a car roof or any 1m² minimum metal surface. The BM-1-PL Komunica magnetic base, allows support of
Reference: CRT-SWR2-571
SWR-Meter and watt-meter for the 27Mhz citizen band and frequencies from 26 to 30 Mhz, allows to measure the ROS (SWR) of the antenna and the power (100 watts maximum). Frequency: 26 to 30MHzPower
16,58 €
Reference: PRESIDENT-CN-CABLE-1226
4 meter RG58U coaxial cable with angled FME male connector, and UHF Male connector (PL-259). Cable type: RG58A / U Impedance: 50 Ohms Length: 4m Connector 1: Right angle FME male connector Connector
14,08 €
Reference: PRESIDENT-CA-3T-PAC1-1453
President CA-T3 + PAC-1 power cord for CB stations with 3 pins, fuse holder + fuse included, and cigarette lighter socket. Compatible with many 27 Mhz 3-pin radio sets. Suitable for 12 and 24v
Reference: SIRIO-BASENPL-CCNS-1254
Sirio N-Mount cable with NC579. RG58, 400cm, PL / No Connector. Coaxial cable RG58 Black, 50 Ohm. Length: 400 cm. Connectors: N-Mount connector (NC579) / No connector. Supplied with: 1 Sirio N-Mount
Reference: PRESIDENT-CA-3T-1225
President CA-T3 power cord for CB stations with 3 pins, fuse holder + fuse included. Compatible with many 27 Mhz 3-pin radio sets.
Reference: PRESIDENT-CA-2T-1224
President-T2 power cord for 2-pin CB 27 Mhz stations, with fuse holder + fuse.
7,08 €
Reference: SIRIO-4-MTR-N-CABLE-FME-F-1255
Sirio 4 MTR N-CABLE + FME Female cable. Coaxial cable for N or N-PL RG58 supports. Impedance: 50 Ohms Length: 400cm Connector 1: Male connector for Sirio N-Mount. Connector 2: FME-Female. Supplied
7,08 €
Reference: CORDON-RG58-UHF-M-30CM-1114
UHF Male - UHF Male (PL-259) coaxial cable with RG58 MIL-C-17 50 ohm connector for frequency use from 0 to 1000Mhz. Available in different lengths: 30cm, 50cm, 1m or 2 metres. Connector 1: UHF Male
7,08 €
Reference: MOON-56-456-LEAD6-2146
Luxury rubberised microphone cable with 6 conductors (5 + 1 screen), matt black, which tends to be flexible when stretched, making it less likely to break internally. The cable is 3 metres long.
6,58 €
Reference: SIRIO-N-PL-MOUNT-1250
Sirio N-PL Mount with SO-239 base plate for antenna installation in PL-259.N-PL Mount with protective capUp to 100 MHz, mounting hole Ø 12.5 mmUHF-Female antenna mount (SO-239)Total size: Ø 42
6,58 €
Reference: SIRIO-CABLE-NE-MOUNT-1256
Sirio coaxial cable for NE-Mount. RG58, 400cm for Sirio NE-Mount with bare end without connector. Coaxial cable RG58, 50 Ohm, Cable for Sirio NE-Mount and Sirtel XVS-Mount. Supplied with: 1 Sirio
Reference: SIRIO-NE-PL-MOUNT-1251
Sirio NE-PL Mount with SO-239 base plate for antenna installation in PL-259.NE-PL Mount with cap, mounting hole Ø 10 mm UHF-Female antenna mount (SO-239) with frequency range DC to 100 MHz Total
Reference: PNI-R150-2318
The PNI R150 coaxial cable with PL / PL adapters has a multitude of applications in the CB band, far beyond its simple use to connect a radio station to a measuring device (such as a SWR power sensor)
Reference: SIRIO-ASP-1-CHROME-1253
Antenna mounting bracket, on mirror rod, Sirio ASP-1 Chrome. Maximum mounting diameter Ø 16 mm, in galvanized steel. Supplied with: 1 Sirio ASP-1 Chrome.
Reference: PNI-CA-3P-2316
The CA-3P PNI cable enables the CB Station to be powered directly from the car battery or via the cigarette-lighter socket (cigarette-lighter socket not included).length: 2 metres 3-pin plug safety:
Reference: ADAPT-FME-M-UHF-M-1264
FME-Male / UHF-Male adapter (PL259).
Reference: CRT-CABLE-MIDLAND-T060-446
This original radio power cable for CB transceiver and compatible with 12V supply 3-pin citizen band transceiver. Comes with: Power cable 12V Midland T060.
Reference: PNI-CA-6500-2317
The PNI CA-6500 cable is primarily designed to supply power to the CB radio stations PNI HP 6500, PNI HP 9500 from the car battery (12V or 24V).length: 2 metres safety: 3A compatible with : PNI HP
Reference: PNI-R50-2319
The PNI R50 coaxial cable with PL / PL adapters has a multitude of applications in the CB band, far beyond its simple use to connect a radio station to a measuring device (such as an SWR power sensor)
Reference: KOMUNICA-G-BK1500-18
Rubber protection for Komunica BK-1500 magnetic base with 150cm diameter.
Reference: SIRIO-BASE-NC-DV-CHROME-1249
Sirio N-Mount DV Chrome mounting bracket. Frequency range: from DC to 300 MHz Overall size: Ø 41 mm Mounting hole: Ø 12.5 mm Materials: Chromed brass, Nylon, Rubber Comes with: 1 N-mount Chrome Sirio
Reference: SIRIO-TP-SCREW-BOLT-CHROME-1257
Screw and bolt, chrome, for Sirio antennas with DV mount (DV-Mount).
Reference: PNI-caucml145-2331
The 125 mm PNI rubber mount is designed to protect the integrity of your dome from scratches that may occur during installation or removal of the CB antenna's magnetic base on the vehicle.Diameter:
2,13 €
Reference: SIRIO-GPPM125-2813
Spare elastic rubber for PM-125 series magnetic bases. It is placed in the lower part of the magnetic base and serves as protection to avoid marking the vehicle in the event of accidental friction
Reference: MOON-50-1253-SCREW6-2134
Round-head buttons/screws for CB radio, PMR speakers, radar detectors, etc. Sold in pairs
1,94 €
Reference: SIRIO-GPPM100-2812
Spare elastic rubber for PM-100 series magnetic bases. It is placed in the lower part of the magnetic base and serves as protection to avoid marking the vehicle in the event of accidental friction
Reference: PNI-SCEX45-2332
This rubber support is manufactured to preserve the integrity of your dome by preventing scratches that could occur when installing or removing the magnetic base of the CB PNI Extra 45 antenna.Size:
Reference: MOON-50-127-SCREW5-2122
Round-head buttons/screws for CB radio, PMR speakers, radar detectors, etc. Sold in pairs
1,58 €
Reference: MOON-50-124-SCREW4-2120
Round-head buttons/screws for CB radio, PMR speakers, radar detectors, etc. Sold in pairs
0,83 €
Reference: MOON-50-126-SCREW5-2121
Round-head buttons/screws for CB radio, PMR speakers, radar detectors, etc. Sold in pairs
0,83 €
Reference: MOON-50-128-SCREW6-2123
Round-head buttons/screws for CB radio, PMR speakers, radar detectors, etc. Sold in pairs
0,83 €
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2025 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.