Viewed products
Magnetic antenna for the 868 MHz frequency,...
-50%
View larger
Magnetic antenna for the 868 MHz frequency, LoRa and ISM transmission and reception, 29cm long with a gain of 3.5dbi, SMA male connector and RG174 coaxial cable of 1m.
Supplied with: 1 Ebyte 868Mhz magnetic antenna TX868-XPL-100.
RX and TX frequencies: 868 Mhz
Bandwidth: 848 Mhz to 888 Mhz
Connector: SMA male
Gain: 3.5dBi
SWR: ≤1.5
Polarization Type: Vertical
Maximum power: 50W
Impedance: 50 Ohms
Antenna length: 29cm
Magnetic base diameter: 3cm
Cable length: 1m
Coaxial cable: RG174
Weight: 31g
Reference: ADAPT-SMA-PCB1-56
Right-angle female SMA RF connector, for soldering to PCB. Operating frequency: 0 to 3 GHzGOLD-plated brassImpedance: 50 OhmsDimensions: 15.46 x 6 x 6 mmThis RF connector is manufactured in compliance
Reference: ADAPT-SMA-M-UHF-F-67
SMA Male to UHF Female Adapter (SO-239).
Reference: PIGTAIL-SMA-M-SMA-M-81
SMA Male to SMA Male pigtail adapter, for connecting a card, for example converter Ham it upconverter card to the SDR transceiver HackRF One SDR transceiver, or the SDRPlay broadband receiverwideband
Reference: ADAPT-SMA-M-SMA-M-291
This RF adapter is fitted with a male SMA connector on both sides. It can be used to connect 2 SMA female cables or connectors, for example.
Reference: ADAPT-SMA-M-SMA-M-291
This RF adapter is fitted with a male SMA connector on both sides. It can be used to connect 2 SMA female cables or connectors, for example.
Reference: ADAPT-SMA-F-SMA-F-292
This RF adapter has a female SMA connector on both sides.It can be used to connect 2 SMA male cables or connectors, for example.
Reference: FILTRE-SAW2-868-F1OPA-830
This filter for the 868 MHz bandpass allows to improve the selectivity of the reception and to suppress the parasitic signals outside the 868MHz band and in particular to reject the GSM 900 MHz
Reference: ANT-868-ADAPT-878
868 MHz mini helical antenna with 2dBi gain for short-distance use, for laboratory tests, on the ISM frequency band 868Mhz frequency band for LoRa, LoRaWan, Sigfox, Zigbee or Helium IoT networks. The
Click here to leave a review
Connectée à un stick SDR, bonne réception
Be the first to ask a question about this product!
This RF adapter is fitted with a male SMA connector on both sides. It can be used to connect 2 SMA female cables or connectors, for example.
3,75 €tax excl.
This RF adapter has a female SMA connector on both sides.It can be used to connect 2 SMA male cables or connectors, for example.
3,33 €tax excl.
PCB antenna Yagi 3 elements for 868MHz with a gain of 8dBi, for long-range use on the ISM 868Mhz frequency band and LPWAN / LoRaWan networks (Sigfox, LoRa), RFID UHF and Zigbee. The antenna is
This filter for the 868 MHz bandpass allows to improve the selectivity of the reception and to suppress the parasitic signals outside the 868MHz band and in particular to reject the GSM 900 MHz
23,25 €tax excl.
868 MHz mini helical antenna with 2dBi gain for short-distance use, for laboratory tests, on the ISM frequency band 868Mhz frequency band for LoRa, LoRaWan, Sigfox, Zigbee or Helium IoT networks. The
0,42 €tax excl.
868 Mhz antenna with 2dbi gain, right-angle male SMA connector for hardware devices on the 868 Mhz ISM band and LoRa / LoRaWan applications or the Helium IoT network and in a test environment, over
4,58 €tax excl.
LoRa 868 Mhz ISM band coil antenna, 4cm long with 2dbi gain, SMA male connector. RX and TX frequencies: 868 MHzConnector: SMA maleGain: 2dBi SWR: ≤1.5Polarisation type: VerticalMaximum power:
4,17 €tax excl.
This EBYTE E32 module is a 100mW long range transceiver with UART interface, available in 433Mhz or 868Mhz version and based on SEMTECH SX1276 (900Mhz) and SX1278 (433Mhz) chip for LoRa and IoT
9,34 €tax excl.
22,41 € -50%Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.