Viewed products
868 Mhz antenna with 2dbi gain, right-angle...
868 Mhz antenna with 2dbi gain, right-angle male SMA connector for hardware devices on the 868 Mhz ISM band and LoRa / LoRaWan applications or the Helium IoT network and in a test environment, over short distances.
Compatible with any device on this frequency band and having a female SMA connector.
Frequencies: 868 Mhz +/-3Mhz
Connector: right-angle male SMA
Gain: 2dBi
VSWR: ≤1.5
Polarisation type: Vertical
Maximum power: 50W
Impedance: 50 Ohms
Length: 11.2 centimetres
Supplied with: 1 right-angle 868 MHz antenna.
Reference: ANT-BOUDIN-868-882
LoRa 868 Mhz ISM band coil antenna, 4cm long with 2dbi gain, SMA male connector. RX and TX frequencies: 868 MHzConnector: SMA maleGain: 2dBi SWR: ≤1.5Polarisation type: VerticalMaximum power:
Reference: EBYTE-LORA-E32-900T30D-8898
This EBYTE E32 module is a 100mW long range transceiver with UART interface, available in 433Mhz or 868Mhz version and based on SEMTECH SX1276 (900Mhz) and SX1278 (433Mhz) chip for LoRa and IoT
22,41 €
Reference: MINI-ANT-433-DROIT-322
433Mhz mini-antenna (for DMR, D-Star, P25 or C4FM activities, for example) with male SMA connector for UHF devices operating from 428Mhz to 438Mhz. Frequencies: 433Mhz +/-5MhzConnector: SMA
Reference: PIGTAIL-SMA-M-SMA-F-15CM-996
This low-loss pigtail cable in RG316 converts a SMA Male connector to an SMA Female connector. Available in 15cm, 50cm or 1 metre.
Reference: ADAPT-SMA-M-SMA-M-291
This RF adapter is fitted with a male SMA connector on both sides. It can be used to connect 2 SMA female cables or connectors, for example.
Reference: ADAPT-SMA-F-SMA-F-292
This RF adapter has a female SMA connector on both sides.It can be used to connect 2 SMA male cables or connectors, for example.
Reference: MINI-ANT-433-DROIT-322
433Mhz mini-antenna (for DMR, D-Star, P25 or C4FM activities, for example) with male SMA connector for UHF devices operating from 428Mhz to 438Mhz. Frequencies: 433Mhz +/-5MhzConnector: SMA
Reference: FILTRE-SAW2-868-F1OPA-830
This filter for the 868 MHz bandpass allows to improve the selectivity of the reception and to suppress the parasitic signals outside the 868MHz band and in particular to reject the GSM 900 MHz
Click here to leave a review
Be the first to ask a question about this product!
This RF adapter is fitted with a male SMA connector on both sides. It can be used to connect 2 SMA female cables or connectors, for example.
3,75 €tax excl.
This RF adapter has a female SMA connector on both sides.It can be used to connect 2 SMA male cables or connectors, for example.
3,33 €tax excl.
433Mhz mini-antenna (for DMR, D-Star, P25 or C4FM activities, for example) with male SMA connector for UHF devices operating from 428Mhz to 438Mhz. Frequencies: 433Mhz +/-5MhzConnector: SMA
3,33 €tax excl.
PCB antenna Yagi 3 elements for 868MHz with a gain of 8dBi, for long-range use on the ISM 868Mhz frequency band and LPWAN / LoRaWan networks (Sigfox, LoRa), RFID UHF and Zigbee. The antenna is
This filter for the 868 MHz bandpass allows to improve the selectivity of the reception and to suppress the parasitic signals outside the 868MHz band and in particular to reject the GSM 900 MHz
23,25 €tax excl.
868 MHz mini helical antenna with 2dBi gain for short-distance use, for laboratory tests, on the ISM frequency band 868Mhz frequency band for LoRa, LoRaWan, Sigfox, Zigbee or Helium IoT networks. The
0,42 €tax excl.
LoRa 868 Mhz ISM band coil antenna, 4cm long with 2dbi gain, SMA male connector. RX and TX frequencies: 868 MHzConnector: SMA maleGain: 2dBi SWR: ≤1.5Polarisation type: VerticalMaximum power:
4,17 €tax excl.
This antenna is specially designed to improve the performance of ISB band 868 MHz devices.It is tuned for 868 MHz frequencies, with a SWR of less than 1.2, which allows it to use almost the entire
52,50 €tax excl.
Stock and shipped from France
14 days to return, 2 warranty
Response within 24h to 72h
SSL, VISA, Mastercard, Paypal
Copyright 2014-2024 - Passion Radio / 4 MY PEOPLE.
Les photos et coloris ne sont pas contractuels.